- Navigation
Results 1 to 4 of 4
Thread: TPiS Oil pan and pump F/S
-
10-18-2009, 03:55 AM #1
InActive Member
- Status
- Offline
- Join Date
- Nov 2008
- Location
- North NJ
- Posts
- 20
TPiS Oil pan and pump F/S
I purchased this oil pan from TPiS 6 years ago for my 396. Its stock
capacity, with a built in windage tray and 1 trap door for oil control. I also had a bung welded in the side for the low oil sensor. The pump is a standard volume and pressure Melling pump (before Select series were available). The pick up is welded on, then Meta-Lax stress relieved.
Pump also come with a hardend shaft. Set up has about 8K miles on it, and I got 30 psi hot idle and around 70 psi at WOT with stockish bearing clearences. The pan new was $185, pump was $30, then another $50 to have it welded and stress relieved. I'm looking for $150 shipped.
Nick
97 Camaro SS #1705, M6
396, AFR 210's, Strange 12 bolt 4:11's
-
11-06-2009, 06:22 PM #2
InActive Member
- Status
- Offline
- Join Date
- Nov 2008
- Location
- North NJ
- Posts
- 20
TTT, still for sale.
97 Camaro SS #1705, M6
396, AFR 210's, Strange 12 bolt 4:11's
-
11-08-2009, 07:54 AM #3
InActive Member
- Status
- Offline
- Join Date
- Nov 2009
- Posts
- 5
Bump for ya Nick
-
12-23-2009, 05:51 AM #4
InActive Member
- Status
- Offline
- Join Date
- Nov 2008
- Location
- North NJ
- Posts
- 20
TTT, still for sale.
Nick97 Camaro SS #1705, M6
396, AFR 210's, Strange 12 bolt 4:11's
Reply With Quote
Bookmarks