- Navigation
Results 1 to 10 of 19
-
10-07-2008, 05:39 PM #1
VIP Member
- Status
- Offline
- Join Date
- Sep 2008
- Posts
- 44

idle clip. big ass cam, OLSD tune
Finally got it all figured out.
Here's a 92, with a pretty big cam, won't disclose too many details, as the owner may not want me to.
But, there is/was a thread about SD tuning, and this is open loop SD, so thought I'd post it up.
Car runs great. Driveability is awesome for such a big cam. AC works good. Idles at 1000 rpm, with or without the AC on.
Just figured out how to use youtube LOL.
[ame="http://www.youtube.com/watch?v=Ca9BevoFTLQ"]YouTube - big cammed LT1 idle clip[/ame]
PS, tell me how the audio is for you guys.TUNER@VA SPEED
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners, EFIlive, tunercat, SCT (Fords), DIABLOSPORT..NOW TUNING MOPARS!!
-
10-07-2008, 06:03 PM #2
-
10-07-2008, 06:03 PM #3
Thing sounds mean, the audio is rather crisp, about as good as its going to get with a camera. I wish he would have just gunned it!
1995 T/A - Blown & Stroked
-
10-07-2008, 08:04 PM #4
-
10-07-2008, 09:11 PM #5
I hope my car sounds half that good with my 230/236 cam
-
10-07-2008, 09:47 PM #6
VIP Member
- Status
- Offline
- Join Date
- Sep 2008
- Posts
- 44

It actually came out smoother than I thought it would. It's something like a 258/264 on a 106. Something crazy like that.
You can drive it around at about 14, 1500, in any gear, with very little buck and surge. It took quite a bit of work. It's fairly rich at those load/rpm levels, and the timing is cranked way back at the same points.TUNER@VA SPEED
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners, EFIlive, tunercat, SCT (Fords), DIABLOSPORT..NOW TUNING MOPARS!!
-
10-07-2008, 10:11 PM #7
Reminds me of the local dirt track cars.
1997 Trans am- M6- Ebay Longtubes, Summit X pipe with Magnaflows, CAI, Adj LCAs with relocation brackets, Comp engineering shocks, Competition stage 2 clutch.
-
10-07-2008, 10:43 PM #8Long Live the Opti
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Sean
- Vehicle
- 1999 Twin Turbo Corvette
- Location
- Fort Wayne, IN
- Posts
- 12,072
-
10-08-2008, 12:12 AM #9
Yeah definitely a good job tuning that sucker, that couldent have been easy.
Sound is A+ (On the camera AND the cam). That car is BEAST...Nick
- 2003 SVT Cobra T56/4.6L - Pullied, Tuned, Full Intake/Exhaust, Stg3 Clutch (29k) - 483rwhp @14-15psi
- 2002 Ford F350 7.3L Powerstroke - Edge Evo II/33" BFG AT TAs/4" MBRP Turbo Back + Intake (164k)
- 1995 Pontiac Firehawk #224 (Chameleon) - Full Bolton/Cammed/Full Suspension (71k) - 12.75 @ 107.94
http://www.fquick.com/Fixxer777

-
10-08-2008, 07:43 AM #10
VIP Member
- Status
- Offline
- Join Date
- Sep 2008
- Posts
- 44

Not sure the owner wants me to post results. It fell a bit short. The owner built it himself, and thinks he knows what changes need to be made. He picked it up, he's going to change somethings, and then we'll try again.
I can tell you he was shooting for 500rwhp, and it's well over 400.
It was on a mad climb, and nosed over about 6200, when it should have ran right to 7000 on the stock PCM.TUNER@VA SPEED
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners, EFIlive, tunercat, SCT (Fords), DIABLOSPORT..NOW TUNING MOPARS!!
Reply With Quote


Bookmarks