Become a ltxtech.com member, Click here to register!

Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23

Thread: :( sad face

  1. #21

    Default

    Quote Originally Posted by 94Dailyz28 View Post
    Just turned it on and looked where the sound was. Saw a little dancing light show in one of the wires towards the bottom of passenger side. I think it's the heads?
    It's loud right there like it's a whole nother exhaust by passenger side of the core, front of engine can hear it from underneath

    The light show indicates that one of your plug wires is bad, thats probably where your loss of power is coming from, so now you know what to do there.

    However, that noise you're talking about perplexes me. Let me see if I grasp this, there is a loud noise coming from the passenger side head towards the exhaust manifold where the bad plug wire is connecting? Or inside the valve cover? That plug wire lighting up like that means its probably misfiring like a bitch anyways, perhaps thats it. I hope so!

    Either way, if this thing is daily driven you need to keep your foot off the gas and drive it carefully.

    Now that you have to replace your plug wires I recommend getting 'er done right and heading here:

    http://www.thunderracing.com/catalog...vid=4&pcid=104

    The very first one, "LT1 Spark Plug Wire Kit" - getting over the valve cover wires is going to make your life easier in the future, especially if another issue occurs or you get headers.

    I won't lie to you getting those put on is going to cost you a pretty penny, but paying out now will seriously save you headache later. Not to mention give your engine bay that look I'm sure you want.

    1995 T/A - Blown & Stroked

  2. #22
    InActive Member


    Status
    Offline
    Join Date
    Oct 2008
    Location
    Inglewood, California
    Posts
    31

    Default

    Yes the noise is coming from over by the left valve cover
    It's like a glug glug glug, i wish i had a video recorder by me
    Last edited by 94Dailyz28; 10-07-2008 at 02:16 PM.

  3. #23

    Default

    Unless you had a bitchin' camera I bet it'd just be a conglomerate of noise unless its extremely loud.

    I say get that bitch to a shop, have that noise checked into. They'll of course try to change your plug wires, I stay by recommendation of going with over-the-valve-cover wires. See what they'll charge for actually doing that for you, rofl.

    1995 T/A - Blown & Stroked

Page 3 of 3 FirstFirst 123

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •