BP Automotive 1996 WS6 Build Thread PICS, PICS, and More PICS!

As many of you guys saw, I was able to pick up a super clean 1996 WS6 just before the shootout. Bought it the Wednesday before the shootout and ran it in the Street Stock and True Street Classes. The Car was headers only, and @MoeHorsePower put an awesome tune on it! So being it had by far the least mods there, it was the slowest ET car there. However, it was incredibly consistent so I was able to take home the opti for the True Street Class!

http://ltxtech.com/forums/attachment...id=34347&stc=1
http://ltxtech.com/forums/attachment...id=34348&stc=1http://ltxtech.com/forums/attachment...id=34349&stc=1
Now for the build!

The Goal is to put down an 10 second run in this car before winter hits. I'm going to attempt this with bolt ons, suspension, and some nitrous. Here is a list of what I have already gotten done with the car, but dont have pics of yet. I will post some up tomorrow.

Walbro In Tank 255 LPH Pump
Replaced the Pacesetter Longtubes and ORY with a Set of TSP Stainless longtubes and Pacesetter ORY. (Because the first setup was Welded together and not band clamped.:doh:)
!Air
!EGR
Relocated Moly Adjustable Torque Arm
Bolt in LCA Relocation Brackets
Tubular LCA
Bolt in SFC

Now onto the Parts that are waiting to be put on!
http://ltxtech.com/forums/attachment...id=34333&stc=1http://ltxtech.com/forums/attachment...id=34346&stc=1http://ltxtech.com/forums/attachment...id=34345&stc=1http://ltxtech.com/forums/attachment...id=34344&stc=1http://ltxtech.com/forums/attachment...id=34343&stc=1http://ltxtech.com/forums/attachment...id=34342&stc=1http://ltxtech.com/forums/attachment...id=34341&stc=1http://ltxtech.com/forums/attachment...id=34340&stc=1http://ltxtech.com/forums/attachment...id=34339&stc=1http://ltxtech.com/forums/attachment...id=34338&stc=1http://ltxtech.com/forums/attachment...id=34337&stc=1http://ltxtech.com/forums/attachment...id=34336&stc=1http://ltxtech.com/forums/attachment...id=34335&stc=1http://ltxtech.com/forums/attachment...id=34334&stc=1

TPIS MAF Ends
TPIS 52mm TB
24x Kit-Harness and PCM not Pictured
Plug Wires
BR7EF or BR8EF
Yank SS3600
Meziere EWP
COMP Roller Rockers Pillaged from a parts car
LT4 Springs
BP Automotive Fuel Pump Hotwire Harness
Underdrive Pulley with Keyed Hub
Glowshift Wideband, Fuel Pressure, and Nitrous Pressure Gauges
Autometer Triple Pillar Pod
Nitrous Outlet Plate Kit

Waiting on my 4L80e to be finished. That should hold up well to the nitrous when I spray it out of the hole.

Mannnnn... such a great start for ur "challenge" of 10s. If anyone has not seen this car in person, let me tell u... it is immaculate.

Probably one of the cleanest TAs I have ever seen.

I am subscribed and looking fwd to this build and ur projected pre winter goal.

LTXtech.com IS my drug...

Quote:

---

Originally Posted by popo8

Mannnnn... such a great start for ur "challenge" of 10s. If anyone has not seen this car in person, let me tell u... it is immaculate.

Probably one of the cleanest TAs I have ever seen.

I am subscribed and looking fwd to this build and ur projected pre winter goal.

LTXtech.com IS my drug...

---

Just trying to get into the 10s Bolt on and spray only. Pretty feasible I think.

Now for the winter build I have something much, much more nasty planned.....

Damn I am subbing to this one! The car is clean man. What kind of numbers are you expecting just N/A?

Quote:

---

Originally Posted by green96ta

Just trying to get into the 10s Bolt on and spray only. Pretty feasible I think.

Now for the winter build I have something much, much more nasty planned.....

---

Should be able to get there. Tony q pulled a 10.99 or maybe it was 11.99 all bolt on and weight reduction at cecil like 4 years ago.

LTXtech.com IS my drug...
OWNER/ADMIN

I have the same gauge and pillar set up. Not the best gauges. But for the price they work. GL with your goals, should be close.

Guys sorry about the slow response and updates! Super busy. Started the car last night-I have a lot of pics to update in the thread.

I decided not to put the roller rockers in because some die hard folks believe they arent a bolt on. SO it is what it is. Without further adieu here are three finished pics to hold you over until I get the rest up. Car just needs a belt right now. Will be here today.


[IMG]http://s1243.photobucket.com/user/BPAutomotive/media/1996%20WS6%20Project/DSC00592_zpscruvbnmi.jpg.html[IMG]


<a href="http://s1243.photobucket.com/user/BPAutomotive/media/1996%20WS6%20Project/DSC00594_zpsadtzbaaj.jpg.html" target="_blank"><img src="http://i1243.photobucket.com/albums/gg546/BPAutomotive/1996%20WS6%20Project/DSC00594_zpsadtzbaaj.jpg" border="0" alt=" photo DSC00594_zpsadtzbaaj.jpg"/></a>

<a href="http://s1243.photobucket.com/user/BPAutomotive/media/1996%20WS6%20Project/DSC00593_zpsegvfgoyj.jpg.html" target="_blank"><img src="http://i1243.photobucket.com/albums/gg546/BPAutomotive/1996%20WS6%20Project/DSC00593_zpsegvfgoyj.jpg" border="0" alt=" photo DSC00593_zpsegvfgoyj.jpg"/></a>

<a href="http://s1243.photobucket.com/user/BPAutomotive/media/1996%20WS6%20Project/DSC00595_zps8ctwuqqe.jpg.html" target="_blank"><img src="http://i1243.photobucket.com/albums/gg546/BPAutomotive/1996%20WS6%20Project/DSC00595_zps8ctwuqqe.jpg" border="0" alt=" photo DSC00595_zps8ctwuqqe.jpg"/></a>

Just click the links because it will not let me upload to shortcut these pictures for some reason.

That's weird. I thought rockers always qualified as a bolt on.

It's got to be asked. So.......who's doing your 24x harness? :rotfl:

Quote:

---

Originally Posted by Fastbird

That's weird. I thought rockers always qualified as a bolt on.

---

I agree. Rockers are def bolt on. Hell if heads are bolt on... how could rockers not be.

LTXtech.com IS my drug...
OWNER/ADMIN

Saweet build. I would also consider rockers a bolton.

Sent from my SM-G900P using Tapatalk

:\Sorry I had the y pipe welded to the headers. They were done like that by the muffler shop and I never mentioned to them that they should be band clamped. Although sometimes welded isn't too bad, it's a sure way to not have exhaust leaks.
Also, this build is coming along nice! Great upgrades thus far!
PS. I miss this car

Quote:

---

Originally Posted by Fastbird

It's got to be asked. So.......who's doing your 24x harness? :rotfl:

---

Lol I was wondering the same thing!

Rockers are bold ons to me too and you have a great looking car.
Any updates?

Quote:

---

Originally Posted by badfbodyz

:\Sorry I had the y pipe welded to the headers. They were done like that by the muffler shop and I never mentioned to them that they should be band clamped. Although sometimes welded isn't too bad, it's a sure way to not have exhaust leaks.
Also, this build is coming along nice! Great upgrades thus far!
PS. I miss this car

---

Its no big deal man! Exhaust shops do that around here as well. Its job security!

Quote:

---

Originally Posted by 383z

Lol I was wondering the same thing!

Rockers are bold ons to me too and you have a great looking car.
Any updates?

---

I have done some more work to the car, Ill have to get some pics together and put an update up. So far here is what I done since the last update.

UMI Adjustable CM Tunnel Mount TA
UMI SFC
UMI LCA
UMI LCA Relocation Brackets
Yank SS3600
4L80e Transmission
TPIS Throttle Body
Nitrous Outlet Plate Kit
NItto NT05 Radials


OH and The 24x Conversion. Harness came from some guy out in Arizona. Can't remember his name off hand!

I think thats it for now, Ill get some Pics Up. Sorry its been a while-the holidays are really hard around here. Lots and Lots of hours of work!

Next stage of the build will see Brian Tooley Ported LT4 Heads and Intake I picked up from Gallatin as well.

Damn man... uve done alot. Sounds like someone is gonna need to be taken even more serious at the 2016 shootout.

LTXtech.com IS my drug...
OWNER/ADMIN

Quote:

---

Originally Posted by green96ta

Next stage of the build will see Brian Tooley Ported LT4 Heads and Intake I picked up from Gallatin as well.

---

Do you happen to to remember the guy who you bought the heads from in Gallatin?

Mark Allardice

http://ltxtech.com/forums/attachment...1&d=1445089205

What spark plug wire kit did you use to make your plug wires? Can you provide a part number?