97 Z28 M6 Roller Partout Firesale! (Updated 8-11)

Hey everyone. I have a black 97 Z28 30th Anniversary edition hard top roller I'm parting out. Just let me know if there is anything anyone is looking for. Just want stuff gone before i scrap car. You can call or text me if interested at 815-291-4833. I have 100 percent feedback on eBay. Or pm me here. I'm located about 2 hours west of Chicago. I can get pics too. Thanks everyone. -Jason.

If something is not listed that you are looking for just ask. Prices are without shipping.

*Both Fenders/$40 each -OEM with Original paint and no cracks with mouldings (Prefer Pickup)

*Both Doors/$50 each -Comes with Glass, Regulator, All the Guts, Hinges, Original Paint and No Cracks (Prefer Pickup)

*Both Power Mirrors/$10 each "SOLD"

*Complete Mint Hatch with Spoiler/$50 (Prefer Pickup)

*Complete Quarter Panels Section/$50 (Prefer Pickup)

*Mint Taillight Panel thay says CAMARO/$20

*Digital Odometer Cluster (143k)/$25 *SOLD*

*Complete 3.42 Posi 3 Channel Rear End with Disc Brakes/$200
(Prefer Pickup) *SOLD*

*Both Air Bags and Air Bag Computer/$20 Each or $50 for Everything

*Complete Tilt Steering Column with Wheel and Key/$25*SOLD*

*Complete Subframe with Suspension/Steering/Brakes/$100 (Prefer Pickup)

*Steel Driveshaft/$15 *SOLD*

*93-96 Taillights/$20 for Set *SOLD*

If there is anyone else looking for any interior pieces, wiring, modules, throttle/cruise cables, or any other miscellaneous items not listed just let me know. I'll ship everything at the buyers expense and provide shipping quotes as well. Thanks again everybody, Jason.

Pics please

What would you like pics of?

Quote:

---

Originally Posted by race21

What would you like pics of?

---

Anything you have for sale, that way anybody interested in your items may see exactly what they will be getting if they buy from you and also to avoid any potential problems ect :)
Just trying to help you and anybody interested in buying your parts is all.

Pics of steering column

Quote:

---

Originally Posted by Project96

Pics of steering column

---

I'll take some tomorrow when I'm out at the car. Thanks.

PM sent . INterested in cluster and other items. Sent my Cell # for pic'

Quote:

---

Originally Posted by FSTFBDY

PM sent . INterested in cluster and other items. Sent my Cell # for pic'

---

Replied to.

Looking for the plastic door sill plates and driver's a-pillar trim if it has all the tabs. And do you have the dash pad by chance?

Quote:

---

Originally Posted by Mr. Brett

Looking for the plastic door sill plates and driver's a-pillar trim if it has all the tabs. And do you have the dash pad by chance?

---

Yes sir, I have all of that. The dash pad does a couple spots on top where it appears a previous owner had something stuck to it. Like a cell phone holder or compass or possibly even one of those nude stick on calendars. Lol. I think it would come off but haven't bothered trying. I can send pics of all the pieces but I have to figure out how to upload pics on here. Thanks-Jason

Quote:

---

Originally Posted by Mr. Brett

Looking for the plastic door sill plates and driver's a-pillar trim if it has all the tabs. And do you have the dash pad by chance?

---

I'd take $40 for all that stuff too. Thanks

Just realized this is a 97 so the dash pad won't work in my 95. I'll take the others though, how much shipped to 53227?

I do have pics. If you have an email address or phone I can send them too. I'd take $30 shipped. No broken tabs as the pics will show. Thanks. Just let me know.

By chance do you have the center console or interior door panels? If so how much for the shipped to 89012??

Quote:

---

Originally Posted by acid5868

By chance do you have the center console or interior door panels? If so how much for the shipped to 89012??

---

Do you need the upper 6 speed section of the console? I don't currently have an extra set of door panels unless I end up parting my other roller out. Thanks, Jason.

I have some pics of steering column. Is there a e-mail address or phone I can send them too? Thanks.

Quote:

---

Originally Posted by race21

I do have pics. If you have an email address or phone I can send them too. I'd take $30 shipped. No broken tabs as the pics will show. Thanks. Just let me know.

---

PM me a paypal address and I'll send it ASAP. Thanks.

I can't PM all of a sudden, this post should put me up to the post count I need, but yes I will take the mirrors and taillights, thank you!

Quote:

---

Originally Posted by LTXMONTE

I can't PM all of a sudden, this post should put me up to the post count I need...

---

@meissen

MEMBER @ LTXtech.com

Thanks Popo!!!

Quote:

---

Originally Posted by race21

Do you need the upper 6 speed section of the console? I don't currently have an extra set of door panels unless I end up parting my other roller out. Thanks, Jason.

---

I need the upper, not worried about the boot but if available would be interested in the lower as well.

Quote:

---

Originally Posted by acid5868

I need the upper, not worried about the boot but if available would be interested in the lower as well.

---

Ya I have one I'd sell for $35. The previous owner installed the slp electric fan control just under the cigarette lighter. So there is a hole there for it. I'll include the entire slp switch/harness kit for an extra $20 if you want it. They cost $63 new. I can provide pics to email or phone. Thanks

Quote:

---

Originally Posted by race21

Ya I have one I'd sell for $35. The previous owner installed the slp electric fan control just under the cigarette lighter. So there is a hole there for it. I'll include the entire slp switch/harness kit for an extra $20 if you want it. They cost $63 new. I can provide pics to email or phone. Thanks

---

I'll take it minus the switch as I already have one. How much for shipping 89012? PM me your info for payment.

I'd do $15 for shipping if you cover the PayPal fees. So $50 shipped work?

Quote:

---

Originally Posted by popo8

@meissen

MEMBER @ LTXtech.com

---

fixed.