95pcm in a 96 car

Location? How many pins on it total?

If I throw the battery in the 95 and check to see if that one plug on the blue one has power all the time I guess would be the easiest way to check?

Quote:

---

Originally Posted by Ugod02010

Kinda off topic, is ur Z arctic white? I think the paint is to far gone on most of the t/a I got from Chris so I'm gonna be repainting it eventually. I'm staying white gonna probably do arctic white, 96t/a it's called something else but it's the same code. I was thinking bout doing the roof black also I like that look breaks up all the white.

---

Quote:

---

Originally Posted by Ugod02010

I snagged that wire outta the 95 and run it right to the bat+ right where they split on the fender. Still no power. I'm putting the driveshaft, torque arm on tight now so I'm gonna look for any ground or something maybe I missed.

---

Quote:

---

Originally Posted by Ugod02010

Ugh. Nothing sticking out like I missed anything. Did u see any differences other than the one I just did?

---

Quote:

---

Originally Posted by Ugod02010

If I throw the battery in the 95 and check to see if that one plug on the blue one has power all the time I guess would be the easiest way to check?

---

Depending on where that connector is.

Right under the passengers feet. It's the blue wire connector that plugs from the body/ to the engine harness

Quote:

---

Originally Posted by Ugod02010

Right under the passengers feet. It's the blue wire connector that plugs from the body/ to the engine harness

---

Yes, Pink wire on Pin G. Power Feed from PCM Ignition fuse #5.

That provides power to several things.

Pin C on the MAF....

Attachment 25689

That is the one that feeds one of the pins in my first few posts. Pin B30 on the PCM, PCM Ignition Feed.

Black PCM connector, B30, Pink wire.

The orange wire in the other plug has power all the time I'm gonna try and connect those. Cuz I have no power at all now on the pink wire coming in

The orange is hot in run and crank?