What size are they? Like... my eliminators are 227s for example.Quote:
Originally Posted by Tubby Z28
LTXtech.com IS my drug...
OWNER/ADMIN
Printable View
What size are they? Like... my eliminators are 227s for example.Quote:
Originally Posted by Tubby Z28
LTXtech.com IS my drug...
OWNER/ADMIN
Believe they come out around 212. Didn't want to go afr, shaft mount rockers etc. They flow over 300cfm intake.Quote:
Originally Posted by popo8
Sent from my SAMSUNG-SM-G935A using Tapatalk
Yeah... the shaft mounts are a fortune. I get it. Lol.
LTXtech.com IS my drug...
OWNER/ADMIN
Yeah that makes it overkill for thisQuote:
Originally Posted by popo8
Sent from my SAMSUNG-SM-G935A using Tapatalk
Lol... its never overkill. Eventually he will out grow the p600.Quote:
Originally Posted by Tubby Z28
LTXtech.com IS my drug...
OWNER/ADMIN
These are the same heads and cam that Brian is running, they should be enoughQuote:
Originally Posted by popo8
Sent from my SAMSUNG-SM-G935A using Tapatalk
Gotcha...Quote:
Originally Posted by Tubby Z28
LTXtech.com IS my drug...
OWNER/ADMIN
https://uploads.tapatalk-cdn.com/201...3530c3469d.jpghttps://uploads.tapatalk-cdn.com/201...051bd79439.jpghttps://uploads.tapatalk-cdn.com/201...6a5a0a5019.jpg
Sent from my SAMSUNG-SM-G935A using Tapatalk
Well heads are on, guide plates look like they will work. Needs longer pushrods, atleast a 7.250 or a 7.3, gotta check again Tuesday when I get back over there
Sent from my SAMSUNG-SM-G935A using Tapatalk
https://uploads.tapatalk-cdn.com/201...f986289f09.jpg
Fucking ugh. Fought us tooth and nail all day. This is the 8th time the intake is bolted down. Had to egg out the bolt holes to line up a little bit. Bolted it down for a gasket impression to check seal as per @Fastbird. Pacesetters went in with one ding to a primary on passenger side, no other issues. Rockers and pushrods in and lashed to 3/4 per ellwein. Back at it tomorrow. Hoping to finish it up then we can bring mine in garage for yankage of engine.
Sent from my SAMSUNG-SM-G935A using Tapatalk