lt1 cranks but no fire.

Sorry bud... here it is...

COuldnt do it from work.


http://www.facebook.com/photo.php?v=500744853282780

its getting oil pressure but the gauge isnt working, will figure that out later after it runs. thanks for posting the video i appreciate it.


Edit. i also want to thank everyone for your help. im sure well get it figured out. i bet its in the c210 220 230 connectors but i cant find the v6 pinout anywhere for them only the v8

I edited the video into your first post also... so people see it right from the beginning

Quote:

---

Originally Posted by popo8

If I understand it correctly....

1993 gen 1 opti,

1994 gen 1 opti. OBD1 port, OBD1 computer OBD1 harness (wire routing)

1995 gen 2 opti. OBD2 port, OBD1 computer, modified wiring for harness or for port (unsure).

1996 gen 2 opti. OBD2 port, OBD2 computer, OBD2 harness.

---

edit on the info some 94 lt1 cames with vented optis

Quote:

---

Originally Posted by chile

edit on the info some 94 lt1 cames with vented optis

---

Thank you sir...

My mistake OP...

Its alight popo. it happens.

Eso i would agree with everyone else it sounds like a ground issue.

Did you get the ground issue fixed? That is certainly the place to start.

unfortunatley have to wait til friday til i can drive to the car. big lesson learned from this build is that having it an hour away really blows

im making notes of the suggestions and will try them all. and let you guys know what i find out

Im a little tired and I didnt want to read from the beginning AGAIN.... have you been able to plug into the computer and see if it had a chance to toss any codes...

Its a long shot, being that it didnt run long.. but you did say it ran for a little.....