Like 6-7000 or so I think :( I only got them last August.
Sent from my screamin chicken pimped out SGSII
Printable View
Off to workmans comp court.... Lets see who the Judge sides with.
And def not enough miles peter...
Get in the habit of an alighment every time u do tires... For handlong my fronts are purposly set leaning in at the top...
Larry (Popo8) Co-owner
LTXtech.com
good luck in court sir
I just can't figure out why all of a sudden it ate through them like this. I've run these tires at the drag strip both times I've gone and at the track when I went to the road course event. The tires looked fine after all of that and I was rotating them after the drag strip and such. Not too long ago, I replaced the worn out outer tie rod ends and have just been daily driving it and now I find this... And unfortunately I'm strapped for cash bad right now and am looking at replacing 2 tires that will not be covered under warranty from Discount Tire + a front end alignment. :( Guess I'll be driving the beater car for a bit...
probably the combination of tie rods being changed. And not set right(just a fraction off and it will do things)
And the autox more the likely messed with the front end. May not seem like it but it beats on the front end. I check and adjust mine few times a year. Because of the abuse the front end sees on track days.
Does that also hold true for aggressive street driving? I like to throw my bitch around in turns kinda hard sometimes lol.
lol yep it will. its a common thing people over look. When you are driving balls to the wall. You need to maintain your engine. And it holds just a true for the suspension.
I follow the motto "Broken engine will ruin your day. Broken suspension will kill you!"
Lol no kidding. Finding that yesterday was a pure fluke, too. I was pissed off from arguing with my wife about some stupid shit and decided to go outside and scrub my calipers clean to blow off some steam and found I was on the verge of 2 blowouts. Guess everything happens for a reason, huh. If it hadn't been for that, I'd have just kept right on driving it till they popped. :lol:
Going to tell you a story. (Don't judge me i was 19 dumb and broke)
I got a 1LE front sway for my 95 TA. And during install i lost 2 bolts for the sway bar bushing clam shell. So i went to a hardware store and picked up some cheap 10 cent bolts. And put them on.
About 3 months later. I was pushing my car around out on some back roads. And i was in a left hand curve doing about 50mph. And the bolts broke. The release of the torsion on the sway. Jerked my car like a mothafo. It felt like i got side swiped on my front end. I lost control. And the car went into a spin. I spun 1 1/2 times. Hit the road edge went airborne flying over the ditch. And did 2 more rotations in a field.
I got out of my car. lit a cigarette then threw up next to my car. Im not going to lie. Time slowed down during it. And felt like it took 5 minutes to come to a stop. And thought in my head "FUCK IM DEAD"
Ya my car dug in the field so much. I had grass shoved between my tire and wheel lip. Needless to say i didnt party that weekend. And used the money for the right parts. lol
Thank my mom may have the pics of the grass embedded in my car. See if she can scan and send them to me. She gots photo albums for each kid. She calls mine "Justin's crazy book"
Hahahaha
Well my car is running funny. did some looking around and found one of my opti vent tubes split and came off. Hope my opti isn't fried. If it is. it will be my first bad one in 12 years if owning a LT1...
Attachment 18821
OK, my friend is selling his complete wet shot nitrous kit with a empty 10 pound bottle and purge kit for $300...should I try getting it?
Holy crap this stuff is awesome! Anyone thinking what I'm thinking? Permanently clean engine bay, anyone? For anyone with a white car, never have to wash your car again for a long ass time? :lol:
http://www . facebook.com/photo.php?v=608410182521936
(Remove the spaces above, the forum's being stupid and won't post this as a link if I complete it, keeps trying to make it a video which won't show on the forum here.)
http://www.globalindustrial.com/g/ja...y-coating-2240
SWEET JESUS!!! Walmart sells caskets...
Attachment 18834
Lol wtf, I've never been to a single Wal-Mart yet that had caskets in the store :shiner: I can think of a great prank to get into trouble with if they did...
Wal-Mart brand sonogram machine :lol: DIY!
I personally am very excited about this new technology and hope it becomes more mainstream. Imagine this stuff on your roof shingles -- the water, snow, ice, etc just sliding magically off your roof. On car windshields - no more need for windshield wipers. On metal infrastructure - no more worries about rust.
Unfortunately right now it creats a dull/hazy finish to whatever you paint it on so while you could paint it onto our cars, it'd have a horrible finish with no reflection to it.
I know its not as obscure but when I went to order my new piston rings. I googled the part number from SRP and Sears.com was the first seller listed. It's only online and you wont find them in stores. Everything drop ships from the original mfg or another affiliate company.
Alrighty, found there's a Brakes Plus right down the street from me that'll do a wheel alignment for $58. Gonna rush home from work today to get the car over to them before they close. Then just gotta decide what I'm gonna do about replacing the front tires...
ok
GAY.
damn...uve been looking fwd to that for a while!
THAT WILL MAKE U SHIT URSELF
rotate the shitty ones to the back...start fresh with the rear ones up front with an alignment.
What i wrote above...
buy u some time on replacing 2.
Larry (Popo8) Co-owner
LTXtech.com
This thread has 1339 pages and I have no idea what any of them are about. I'm so confused haha
Well, nevermind on Brakes Plus... Their lift is too tall for my car to drive up on to. Caved and set up an appointment with the Chevy dealership up the road from where I work for tomorrow morning because they have a drive-on lift. Then I can run over to discount tire after work and get 2 new tires. /sigh
Think of this like a chat room basically lol. Almost anything goes as far as topic. :)
Sent from my screamin chicken pimped out SGSII
Ok guys got a kill story, I was in my way home from work and saw this black TA prob 01or 02 anyways I rev up at him just messing around and proceed to my destination well he's sitting at the light that I turn at it turns green and I'm already almost into the turn and he revs at me and I say awwww hell naw lol and drop into second and gas it and turn to the right I get sideways (I love gettin sideways) and go to the straight lane right in front of him and go about 30 and wait for him and we race and I pull him about 3 cars and it keeps going from there I finally let off at 110 bc I started getting a vibration, anyways I felt pretty accomplished :) and turns out he's a graphic designer and a painter and he may hook me up once he gets his shop and he has a set of 18" torque thrust II's he's tryin to get rid of bc they won't clear his new brake set up, so yeah that's my story
SMOKE TIRES NOT DRUGS
Saw this on Meissen's fb page...
Attachment 18847
...turned it into THIS:
Attachment 18848
Larry (Popo8) Co-owner
LTXtech.com
another long day at work, then went to a buddy's storage unit and helped get a LS ready to pull! its funny seeing a piston that the valve made its own re-leaf in! after seeing that i will NEVER run a single spring (he had beehives that failed)
At work today one of the LS butt buddies kept telling me I plan on doing a ton of work just yo run 11-12 second passes...
Honest opinions, what do you all think it will run...
Advanced induction 212cc heads (11.0-12.5/1 compression ratio)
Advanced induction 230/238 cam
Ported intake
100-125 wet shot
3.23 gears
TH400 with trans brake
2 step
Usual bolt ons
Subframe connectors
Coil overs
The 2 step, trans brake and coil overs will not be installed for a couple years.
Keep in mind, these are just what I want to do, nothing is final and I am posting here for tips and suggestions
Gonna depend how it hooks... how well you drive.. how good your tune is.
There is a good chance it is an 11 second car.... but right now, my guess is its a 15 second car....right?
bich please...Quote:
Originally Posted by popo8:324561
14...real racecar status