That should clear the garage at the cottage. Thank you for the link!
Aiming for Thursday to install the LCAs and LCARBs. As well as change the fluid in the rear. I've had the LCAs since... yhr first of July lol
Printable View
That should clear the garage at the cottage. Thank you for the link!
Aiming for Thursday to install the LCAs and LCARBs. As well as change the fluid in the rear. I've had the LCAs since... yhr first of July lol
I FIXED IT. One of the plug wires wasn't on all the way lmao. It didn't light the CEL. I was talking to a friend at school today and I popped the hood to show him my sexay lt1. Then I saw the plug wire was hanging lol I'm so happy.
. I had intentions on doing a LE2 heads and cam swap this winter. After some pricing and thinking, I changed my mind. I'm going to hold off until next year so I can do it properly. Depending on funds, my goal is to get the engine rebuilt, heads, cam, intake, throttle body, clutch, suspension. Maybe I'll get a rear end too.
But for this winter, I'm going to get some new seats and remove the rear seats.
I still have the car. I break the tires loose in second gear at like 4500.
She likes to growl at the ladies now. But not the ugly ones that's for sure :D
Ugly is only a light switch away, but you can feel fat. Remember that young grasshopperQuote:
Originally Posted by DanDalessandro
Sent from my SAMSUNG-SM-G900A using Tapatalk
I'm going to be converting to OBD1. I have a question about this now. There are differences in the cam between a 95 and 97. The 95 has a slight bit more of lift I think. Would it be a bad idea to use a 95 base tune on my 97? The internals are all stock. I'm not sure what else is different from the two. Any chime will be heard!
Dont forget to do the resister mod to the knock sensor or find an lt4 knock module for the computer.
As for the other questions... idk. My car is far from stock so when converting to obd 1.
My question is why do u want to convert to obd1 for a stockish car? If its about tuning software, there is software for obd 2.
LTXtech.com IS my drug...
Software and datalogging for obd2 is about $900 vs about 90 for obd1 lol. My car will be getting a heads and cam package in the future as well. I will be tuning it myself after a base tune when that time comes. There really isn't many people who touch the archaic lt1 up here that is talented unless it is 24x. There are a couple lt1 tuners but they are trash.
I will be replacing the knock sensor with a obd1 one.
If u get the cable from carputing.com u can use my loaner tuning laptop.
with that aside... what tuning do u need to do. Car is stock ish, right?
LTXtech.com IS my drug...
@Sahara54 currently has the computer
LTXtech.com IS my drug...