Coil brackets

Have you considered moving the coils away from the valve covers/intake?

These are fairly easy to fabricate.

Quote:

---

Originally Posted by Injuneer

Have you considered moving the coils away from the valve covers/intake?

These are fairly easy to fabricate.

---

If I can't find something to work on the valve covers or intake I will try that. I like the shorter wires and having to worry about routing them around my headers but if I have to this is an easy alternative. Thanks


Sent from my iPhone using Tapatalk

I couldn't find the BP coil brackets on the website, anybody know where I can find them ?

Quote:

---

Originally Posted by Injuneer

Have you considered moving the coils away from the valve covers/intake?

These are fairly easy to fabricate.

---

That looks like it could work great.

Sent from my SM-N915V using Tapatalk

Quote:

---

Originally Posted by LTX_TY_

I couldn't find the BP coil brackets on the website, anybody know where I can find them ?

---

I cant find them either, they used to be on his site and on ebay. I know cuz i have a brand new set of them for the conversion I still havent done.

Quote:

---

Originally Posted by LTX_TY_

I couldn't find the BP coil brackets on the website, anybody know where I can find them ?

---

I couldn't either. I sent them an email so I will let you know when they respond


Sent from my iPhone using Tapatalk

I have some that I'm including in my 24x kit, but can snap some pictures if you want to try and make your own. It's a pretty simple setup.

Quote:

---

Originally Posted by harner

I have some that I'm including in my 24x kit, but can snap some pictures if you want to try and make your own. It's a pretty simple setup.

---

That would be great. Or do you have some you would be willing to sell by themselves ?


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by firebird_1995

Same hardware that holds the injector rails down. I don't think there will be anything there to bolt to on a single plane though. Most of the rails for single plane intakes bolt through the side of the rail. This would be more for factory intakes. I could probably make you a set that would work if you didn't want to bolt to the valve cover.

Sent from my SM-G900V using Tapatalk

---

Those won't work on mine. Fuel rail bolts in from the side like you said. Do you have some that would work for that application or you mentioned being able to make some ?


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by pngwn

I couldn't either. I sent them an email so I will let you know when they respond


Sent from my iPhone using Tapatalk

---

Talked to Cody at Bp today and he said they no longer carry them


Sent from my iPhone using Tapatalk