Need to fix LT4 intake

Quote:

---

Originally Posted by 383z

Ok, I e-mailed Lloyd Elliot and he said he can add material to my LT1 intake and then machine it back flat to seal against the heads for $200 then fully port the intake for another $200 for a total of $400. I like the way this adds up and was wondering which gasket I would use of I go this route? Will I use the LT4 race gasket pn 12367777 now that it will fit like the LT4?

---

Yes, when the LT4 is fully hogged out by Lloyd for LT4 heads, you use the LT4 Race Gasket.

Quote:

---

Originally Posted by Injuneer

Hard to measure, but it appears they added the 0.100" required to accomodate the LT4 head runner that is supposed to be 0.100" taller. My measurements for the width of the "tab" beyond the injectors, were 0.45" for the LT1 intake, and 0.55" for the LT4 intake.

---

Injuneer, Thanks for taking the time to measure you intake. I really appreciate it.

Quote:

---

Originally Posted by Fastbird

Yes, when the LT4 is fully hogged out by Lloyd for LT4 heads, you use the LT4 Race Gasket.

---

Fastbird, I was assuming that and thanks for verifying. I feel better about leaning towards sending him my intake.