BACON BITES!

Printable View

07-05-2013, 11:32 PM
94Blackbird

Probably couldn't hurt
07-05-2013, 11:46 PM
popo8

Quote:

Originally Posted by 94Blackbird

Probably couldn't hurt

http://ltxtech.com/forums/showthread...le-Body-Bypass
07-05-2013, 11:53 PM
94Blackbird

Quote:

Originally Posted by popo8

http://ltxtech.com/forums/showthread...le-Body-Bypass

Sweet deal!
07-05-2013, 11:57 PM
firebird_1995

Lol clubbing a baby seal
07-05-2013, 11:58 PM
94Blackbird

Quote:

Originally Posted by firebird_1995

Lol clubbing a baby seal

:)
07-06-2013, 10:20 AM
Featherburner

Quote:

Originally Posted by Fastbird

Ok, nice choice on the Envoy Denali! Get yourself an electric fan conversion and reap the extra MPG's.

Do yourself a favor and check the ball joints. I've replaced many many MANY ball joints on those.

Have you gotten into changing the stepper motors? That's a big problem with the dashes in these trucks.
07-06-2013, 11:06 AM
Badbird_96

Quote:

Originally Posted by Featherburner

Have you gotten into changing the stepper motors? That's a big problem with the dashes in these trucks.

Can you elaborate?

Edit - looked it up. The 03 we had the tach one was all jacked up lol. This one all the guages work properly for now.
07-06-2013, 11:26 AM
Featherburner

Quote:

Originally Posted by Badbird_96

Can you elaborate?

Edit - looked it up. The 03 we had the tach one was all jacked up lol. This one all the guages work properly for now.

My wife had an 05 Trailblazer and a few stepper motors (fuel, volts, temp) pooped the bed. I found a guy on ebay that sold them for a fair price. I replaced all of them while I had the dash out. Little bit of a pain unsoldering and re-soldering them, but it was well worth it to have a fully functioning dash. When we traded it in the new water temp stepper had already given up the ghost. Good luck with your new ride!
07-06-2013, 06:00 PM
Badbird_96

Quote:

Originally Posted by Featherburner

My wife had an 05 Trailblazer and a few stepper motors (fuel, volts, temp) pooped the bed. I found a guy on ebay that sold them for a fair price. I replaced all of them while I had the dash out. Little bit of a pain unsoldering and re-soldering them, but it was well worth it to have a fully functioning dash. When we traded it in the new water temp stepper had already given up the ghost. Good luck with your new ride!

Thanks. Yeah her 03 said it was idling at 5k lol. Hopefully this one wont have any issues for awhile. Biggest one right now is i bent the bumper in my friends driveway. Its fixed now but definetely cant do his driveway it sits too low.
07-06-2013, 09:23 PM
Badbird_96

Hey larry does your clade have the air compressor in the back? I was checking the denali out and it has the auto leveling from the factory. Apparently an option was to have an air hose and a manual operation switch so you can air tires up. Its a very handy option and the hose is long enough to reach the front tires so that means it can reach tires not on the vehicle. I had never seen it before.