TPiS Oil pan and pump F/S
I purchased this oil pan from TPiS 6 years ago for my 396. Its stock
capacity, with a built in windage tray and 1 trap door for oil control. I also had a bung welded in the side for the low oil sensor. The pump is a standard volume and pressure Melling pump (before Select series were available). The pick up is welded on, then Meta-Lax stress relieved.
Pump also come with a hardend shaft. Set up has about 8K miles on it, and I got 30 psi hot idle and around 70 psi at WOT with stockish bearing clearences. The pan new was $185, pump was $30, then another $50 to have it welded and stress relieved. I'm looking for $150 shipped.
Nick
http://inlinethumb56.webshots.com/45...600x600Q85.jpg
http://inlinethumb58.webshots.com/43...600x600Q85.jpg
http://inlinethumb28.webshots.com/44...600x600Q85.jpg
http://inlinethumb31.webshots.com/45...600x600Q85.jpg
http://inlinethumb42.webshots.com/37...600x600Q85.jpg
