LTx HID custom (true) projector bi-xenon install
Well,
I finally got around to starting the re-retrofit (I did a complete HID write-up on my H4 mains and H3 fogs about 2 years ago, just search my screen-name if you want to look at the old install) of my 96 LT1 WS6 for a TRUE set of projector, not the fake projectors that I currently have installed. I'm still building my mini vacuum table for making the custom clear (acrylic (probably)) lens covers. Many of you have probably seen (Blackbird WS6's (Brian)) HID retrofit; this will be fashioned very similar to his setup. I will be making some new additions to that basic setup. I hope to be able to make the clear lens covers in some capacity to warrant producing a few every couple of months for LTx guys that would like to perform a TRUE PROJECTOR HID conversion.
Here is my parts list and a few pics of items:
1. AMP to DS2 converter cables (I currently have a HID setup with H4's)
2. FXR true projectors (These are the same thing as the bi-xenon FX35's
except you don't have to trim the bracket tab mounting points. It comes
already trimmed. both projectors are brand new, glass lens, DS2, pigtail for bi-xenon hookup)
operation (HI/LO)
3. 4300k DS2 bulbs
4. Vacuum table
FXR (bi-xenon, glass lens, pre-trimmed housing, amp to DS2, shrouds)
http://i5.photobucket.com/albums/y19...onnectors1.jpg
http://i5.photobucket.com/albums/y19...-rshrouds3.jpg
http://i5.photobucket.com/albums/y19...rbi-xenon2.jpg
http://i5.photobucket.com/albums/y19...rbi-xenon3.jpg
http://i5.photobucket.com/albums/y19...rbi-xenon1.jpg
PS: I need someone with an extra set of LT1 headlight housings to donate or sell them real cheap (so I can make my mold for the clear lens). Somebody hook me up :skull:
