clearance stock valve covers for pro mags

Alright guys I need to know what I need to cut out or bend to get NSA comp pro mag rockers to fit under the stock valve covers. Pictures are good. Thanks

[IMG]Attachment 32261[/IMG]

I'll sell you these or trade you if you've got some stuff

I had to remover all of the internal bracing to clear mine. No issues with sealing either.

Remove just the bracing on the intake side not the metal bolt hole tube or section in the front close to the exhaust

@zooguy I have some things what do you have in mind

I have a thread on here in the classifieds with things u am looking for

You don't have to remove the entire brace if need be. You can take a pair of pliers or vice grips and bend the lip of the brace straight down. Only issue is it might distort the bolt wells that are connected to the brace so it may take some fandangling to get the bolts into the holes in the cylinder head. However doing so will not compromise the integrity of the valvecovers and they will remain as rigid as if nothing was done to them.

@SS RRR, I tried your idea first and they fit on there good. Thanks guys for all the input