swaping a 1995 lt1 in a 1980 c10. whats the best way to go with motor mounts. any bolt in mounts for this swap? thanks
Printable View
swaping a 1995 lt1 in a 1980 c10. whats the best way to go with motor mounts. any bolt in mounts for this swap? thanks
You should be able to use the stock V8 mounts that the truck came with. Use the clamshells off the V8 you are taking out and bolt them to the LT1 block.
Oh, and keep us posted on the project. That is one of my favorite body styles of GM trucks, so I am interested in seeing how this turns out.
Yeah... why have we not seen this project before?!?!?!?!
@Ltconvert the ideas are flowing again. and yes, just use stock gm small block mounts. only reason lt1 mounts are different is to allow clearance for the ac compressor on the passenger side, hence the block has a extra hole to move the mount back on the fbody and bbody, on the truck you just bolt it in the forward position good sir
thanks for the help guys, i'll keep the progress pics coming. Origanal engine was a diesel, then a cammed 455 olds that just came out. truck was sitting for ten years plus. In pretty good shape.
anyone have some idea on headers? looking for some block hugger d-ports with the collector near the back, not in the middle like most I have found, Also do I just need the standard SBC mounts for the 1980 c10? thanks for any help.
pic of header clearence.Attachment 32644
Nice build! Good to know an lt1 can share the same mounts as a traditional sbc. I've been thinking about swapping in a carbed and cammed LT1 in my 87 c10.