120 lb. injectors, intake elbow for sale

Intakeelbows.com (now 6160.com) elbow, 4150 flange, LT1 throttle body. comes with throttle cable bracket. Polished. WILL fit under a STOCK Z28 hood when it's bolted to a Victor E manifold (that's what I was going to use). $200 shipped/firm.


http://i33.photobucket.com/albums/d9...r/IMAG0338.jpg
http://i33.photobucket.com/albums/d9...r/IMAG0339.jpg
http://i33.photobucket.com/albums/d9...r/IMAG0340.jpg
http://i33.photobucket.com/albums/d9...r/IMAG0115.jpg
http://i33.photobucket.com/albums/d9...s/IMAG0152.jpg

I dont know if Im interested in the injectors... still trying to figure out, if I need high impedence,,, or low impedence..... I so confused....

What ecm? If stock you need high impedance, unless you have a impedence converter box

yeah... Im stock. :(
Being told by guys on here that MAYBE my 60# injectors may not cut it.....

Injectors are sold.

Larry those 120's would have been way overkill.

Posted from my Rooted and ICS'd Rezound

Quote:

---

Originally Posted by Fastbird

Larry those 120's would have been way overkill.

Posted from my Rooted and ICS'd Rezound

---

Ok, Im just trying to prep for anything after this pump swap...
(sorry for messing up your thread....)

hey popo i have a set of low ohm 83's. you would need a driver module if you are using a stock ecm.

Quote:

---

Originally Posted by BIG CAT

hey popo i have a set of low ohm 83's. you would need a driver module if you are using a stock ecm.

---

I will keep it in mind... Lemme see if my 60s are maxed... and Ill try to find some bigger Highs first, so I dont have to do the additional stuff.... but if I get to that point, Ill hit you up.