need an ECM for my 93 Z28

need an ecm for my 93 Z28 please. whatcha have??? seems remans arn't available anymore...

I have one from a conversion car I am building. I can do $100 plus shipping. That's what I got it for. Paypal accepted only. Let me know.

hardto come by, I'd take that offer..lol. I have an extra but will not part with it

I have one I will let go for $80 comes with a piggyback for new chips. It is tuned for full bolt ons and hot cam.

^That was acually me who posted above(wife didnt log out).

i have another one here aswell 93 ecm stock untouched pm me.

I'm not sure if you found one yet, but when I was looking I found that madtuner sells them.

thanks for all the replies guys! i talked to madtuner and he believes my problem lies elsewhere. not with the ecm.

Just out of curiosity, what is your car doing? I've had a massive amount of electrical problems with mine as well.

having a tip in and cruise issue, stumbles and misses at about 10-20% throttle. it will do it in park, take off and cruising. idle and hard accell its fine, pulls hard. once you get past 20% throttle its runs like a top. started all of a sudden, very slight stumble at first and progressed to a very pronounced stumble. things i have done and changed. now taking into account the odo shows 316,xxx i decided to replace a few of the sensors. tps, map, iac, gm opti, icm, ign coil, coil wire, fuel pump and resealed the intake and t/b. i still need to swap plugs and wires. with a snap on scanner hooked up i took her for a ride. there were a couple of things i noticed, split blm's, not to far off, right o2 lazy on the side with the lower blm and iac counts were at 0 when idling. checked for vacuum leaks and exh leaks, found none. checked tps adjustment aswell as iac height. both good. the only codes were right o2 and quad driver module. so needless to say, i'm a bit stumped. it starts great and idles great to.