VATS Question

I am thinkin of doin a v6 to v8 swap and was wonderin about the VATS situation. The v6 is a 97 and the motor and computer i am going to use is out of a 96. I want to use the original key for the v6 car, so my question is will i have to get the V tuned out. Any other useful info about the swap would be greatly appreciated.

Vats is a part of your BCM, to my knowledge you do not need to swap those out so you should be fine.

worst comes to worst you can buy a blank of that key with the proper resistance chip in it and get it ground to they key that you need or delete vats with at resistor, done

thank you for your replies. . . what i needed to know