93 chevy s10 with lt1/t56 on a dyno

Well haven't been on here in a long while and figured I would give you a update on my truck. Heres the dynochart and a video of it on the dynojet. Than a little background on the motor putting out the power.

http://i257.photobucket.com/albums/h...r/100_0251.jpg

http://i257.photobucket.com/albums/h...h_100_0249.jpg

On the video above, it is true duals with hooker aerochamber mufflers 2.5 inch piping.

http://i257.photobucket.com/albums/h...penexhaust.jpg

This clip, was in between the muffler swap from the hookers to the super 44s. This is exhaust piping with no cats that are cut off right behind the cab wall.


Ok so heres the specs of the motor:

95 z28 lt1/t56 ---All emission items are on the motor
rebuilt with stock bottom end
bored .30 over
erson 218/226 duration @ .50 .500 lift exhaust/intake
Comp cams NSA pro mag 1.6 RR's
stock heads with HP 3 angle valve job
msd 8.5 wires
1-5/8 shorty headers
true duals with NO crossover pipe 2.5 inch no cats and flowmaster super 44s
walbro 255 intake pump.
Tuned by Wait4Me performance on the dyno.

Thats it, And I am fairly happen with the results but of course I want more at some point in time.

That's a tiny little cam! I bet its a fun truck though.

not bad numbers. There may be more hiding in there. I make the same HP and a little more TQ with all stock internals. What rear and gears you running?

Quote:

---

Originally Posted by jaysz2893

not bad numbers. There may be more hiding in there. I make the same HP and a little more TQ with all stock internals. What rear and gears you running?

---

First off, I had a brain fart last night, Its tuned by pcm4less not wait4me. I got the two mixed up, lol.

And the rear is a 8.5 and 3.42 gears. I am upgrading to either 3.73s or 4.10s and a eaton posi.

And yes the cam is small, but i plan, when money is available for a motor upgrade, to do the le2 h/c package.

thats a good looking truck. what wheels are those? must be fun on the street with the 6 spd

Quote:

---

Originally Posted by ItSSlowZ28

thats a good looking truck. what wheels are those? must be fun on the street with the 6 spd

---

They are eagle alloy 225s. 18x8 upfront and 18x10s out back. And it is a blast to drive on the streets. I love the t56!

heres a better picture of the wheels.

http://i257.photobucket.com/albums/h...0/100_0310.jpg

http://i257.photobucket.com/albums/h...0/100_0379.jpg

http://i257.photobucket.com/albums/h...0/100_0380.jpg

Bad ass little truck you have!

Thank you! When she's on the road, it's a blast. I need to get a video of the exhaust at some point. That and I want to put on e-cutouts bad BC that clip above with the mufflers off makes the "baby's can sound a hell of a lot better.