PDA

View Full Version : 93 Z28 Hardtop Project For Sale: Diamond, Crower, Wolfe, Areomotive, Spohn



dwritch
08-28-2009, 08:12 PM
I have a 93 Z28 (White w/ Black top and Interior) I have been piecing together for sale. I have lots of parts to go with it and tons of time into the car. Car does need paint. Clean title. Was going to be a street car.

-Full fuel system including an Aeromotive A1000 pump, A1000 Regulator, and Large Areomotive filter, Using a stock tank with fittings installed. -8 feed to front of car in stock location and -6 return in stock location.
-Mini Tub that gives you 16" to the inside of the lip on the quarter panel (will require coilovers)
-Lots of weight reduction in nose as well as interior dash of the car.
-Spohn 1" solid rear swaybar (drag)
-Custom offset lcas poly/ Heim combo.
-All graphite interior out of a 96 w/ 65k miles *Mint*
-Hatch w/o defrost
-B&M Pro Ratchet shifter installed in stock location (Very clean look) for 4 speed automatic.
-UMI Single adjustable panhard bar
-KYB agx front struts hotchkis springs
-SJM Manual brake conv. w/ line lock
I have a bunch more stuff but this comes with the car.


-Mezire WP in Coated housing-Used
-Canton oil pan-Used
-Crower 6" Billet rods-Used Dyno Time Only
-Diamond Custom NOS pistons for a sbc/lt1- NEW
-LTX Intake with fogger underneath (see other ads)
-Built 4l80e w/ manual valve body, hd drum, billet input shaft, etc
-42lb FMS injectors
-Much much more

I will sell everything for 3400 obo. Need to sell this car.

Derek, dwritch@hotmail.com
Pics be up this evening.

hotrod96z28
08-28-2009, 08:14 PM
how much for the injectors

dsmawd350
08-28-2009, 08:43 PM
I have a 93 Z28 (White w/ Black top and Interior) I have been piecing together for sale. I have lots of parts to go with it and tons of time into the car. Car does need paint. Clean title. Was going to be a street car.

-Full fuel system including an Aeromotive A1000 pump, A1000 Regulator, and Large Areomotive filter, Using a stock tank with fittings installed. -8 feed to front of car in stock location and -6 return in stock location.
-Mini Tub that gives you 16" to the inside of the lip on the quarter panel (will require coilovers)
-Lots of weight reduction in nose as well as interior dash of the car.
-Spohn 1" solid rear swaybar (drag)
-Custom offset lcas poly/ Heim combo.
-All graphite interior out of a 96 w/ 65k miles *Mint*
-Hatch w/o defrost
-B&M Pro Ratchet shifter installed in stock location (Very clean look) for 4 speed automatic.
-UMI Single adjustable panhard bar
-KYB agx front struts hotchkis springs
I have a bunch more stuff but this comes with the car.


-Mezire WP in Coated housing-Used
-Canton oil pan-Used
-Crower 6" Billet rods-Used Dyno Time Only
-Diamond Custom NOS pistons for a sbc/lt1- NEW
-LTX Intake with fogger underneath (see other ads)
-Built 4l80e w/ manual valve body, hd drum, billet input shaft, etc
-42lb FMS injectors
-Much much more

I will sell everything for 3400 obo. Need to sell this car.

Derek, dwritch@hotmail.com
Pics be up this evening.
how much without all the xtras you listed? what rear is in the car? what wheels?

It'd be sweet to have a black mini tubbed 93 T/A and a white mini tubbed 93 Z28:devil:

dwritch
08-28-2009, 10:21 PM
Pm's sent