Getting that 8.8

[Colossus]

Now I just need to figure out how to make it fit up under the old 94.

[dsmawd350]

very detailed post...not. gonna have to add all the brackets off the 10 bolt onto the 8.8 at the least

[justanlt1]

go to ls1tech.com and look up a guy named cam he built mine and did a good job

[ksmyss]

if you can find one that is the same width you can transfer over the brackets and build a torque arm mount. or you can make collars like i did and use the axle tubes off the 10 bolt and set your own width.