PDA

View Full Version : Driveshaft Recomendations


shownomercy
09-13-2020, 06:16 PM
Looking for a steel DS, so far my current pick is a PST from Brutespeed.

Any other options ?
Injuneer
09-14-2020, 10:28 AM
I've used the Mark Williams 3" chrome moly driveshaft with forged weld yokes and solid 1350's on a couple iterations of my Formula. Only issue is you are responsible for providing the required length. But we worked it out for both the TH400 build, and the TH400+Gear Vendors build.
1QUICKZ28
10-04-2020, 05:49 AM
Strange Engineering built mine. Had to have a shorter one made due to installing their Strange S60. 1350 u-joints.


Sent from my iPhone using Tapatalk
SSlowBoat
10-06-2020, 08:36 AM
strange
1QUICKZ28
10-07-2020, 05:55 AM
strange



https://www.strangeengineering.net/

https://uploads.tapatalk-cdn.com/20201007/54bb79fe2d517365a001e1a734711182.jpg


Sent from my iPhone using Tapatalk
shownomercy
10-07-2020, 01:20 PM
I'll see if Strange can sell me the Fbod standard steel DS with a 80e yoke.
SSlowBoat
10-08-2020, 09:12 AM
I'll see if Strange can sell me the Fbod standard steel DS with a 80e yoke.

we just did the custom steel one from them. came in 2 weeks. you pick the yokes. not that you have that much time now for install dad!
shownomercy
10-08-2020, 11:40 AM
we just did the custom steel one from them. came in 2 weeks. you pick the yokes. not that you have that much time now for install dad!

Ya when I am coherent enough to call em I will see what they can do.
SSlowBoat
10-08-2020, 11:46 AM
Ya when I am coherent enough to call em I will see what they can do.you got about 2-3 years until youll be coherent enough [emoji1787][emoji1787]

Sent from my SM-N975U using Tapatalk
shownomercy
10-09-2020, 11:27 AM
Called and tried to just get them to give me the standard Fbod steel DS for a S60 rear, but with a 32 spline TH400 yoke... no dice, they told me I had to measure cause it wouldn't work. :/

So, did what I should have, and just ordered the standard DS, I'll swap yokes when it arrives.
SSlowBoat
10-09-2020, 11:30 AM
Called and tried to just get them to give me the standard Fbod steel DS for a S60 rear, but with a 32 spline TH400 yoke... no dice, they told me I had to measure cause it wouldn't work. :/

So, did what I should have, and just ordered the standard DS, I'll swap yokes when it arrives.thought a 4l80e required a shorter shaft

Sent from my SM-N975U using Tapatalk
shownomercy
10-09-2020, 11:38 AM
thought a 4l80e required a shorter shaft

Sent from my SM-N975U using Tapatalk

I have had a factory DS and a PST made for 60e in the car since I got it running. No issue.