View Full Version : 3" catalytic converter recommendation
captainofiron
12-17-2019, 08:19 AM
I finished up installing a true dual system from Speed Engineering, but I need to get some cats because:
1) since I have to get this thing emission tested
2) the driver side pipe doesn't quite reach the header
Does anyone have recommendations?
I was looking at the Magnaflow spun ones but I'm worried about ground clearance since they aren't flat and they don't have a heat shield
Also I'm pretty disappointed with their technical help line. I tried to get info on their universal cats and they just flat refused, they wanted a car to look up on their application guide, so I finally told him and all they would give me was stock replacement parts
I tried to ask about the 59929 but they wouldn't tell me anything like if it's for Obd2 or later or anything, just kept saying the guide doesn't show that as compatible
Injuneer
12-17-2019, 10:46 AM
I ran a pair of Carsound 3" cats in a Y-pipe (which was eventually replaced with true duals. The pic shows them while the Y-pipe was being fabricated at Mufflex. Denny recommended the Carsounds, and the setup passed NJ emissions. All of this was 19 years ago, so I have no idea if they even sell the same cats.
Z28pr0jekt
12-17-2019, 02:38 PM
What is your state's regulation on emissions testing? Usually once a car hits a certain age, it is exempted.
captainofiron
12-18-2019, 03:07 PM
I ran a pair of Carsound 3" cats in a Y-pipe (which was eventually replaced with true duals. The pic shows them while the Y-pipe was being fabricated at Mufflex. Denny recommended the Carsounds, and the setup passed NJ emissions. All of this was 19 years ago, so I have no idea if they even sell the same cats.
I looked online and couldn't dig up anything on car sounds that wasn't really old, thanks though
captainofiron
12-18-2019, 03:10 PM
What is your state's regulation on emissions testing? Usually once a car hits a certain age, it is exempted.
Texas in my county requires Obd2 testing on vehicles 96 and newer, so I'm screwed no matter how old my car is
shownomercy
12-18-2019, 08:54 PM
Texas in my county requires Obd2 testing on vehicles 96 and newer, so I'm screwed no matter how old my car is
In my experience, OBD2 testing is a easy enough test to pass if the visual aspect is not to stringent. (if it is you failed regardless of what cats you put in) Is the car tuned for turning off all emissions ready lights?
Injuneer
12-18-2019, 10:21 PM
Car Sound Exhaust owns Magnaflow. Appears the converters are now branded as MagnaFlow.
http://www.marcomuffler.com/magnaflow.html
https://www.magnaflow.com/products/94009-catalytic-converter-magnaflow-standard-grade-federal-epa-compliant-universal-catalytic-converter?aces=9577099
California and New York require CARB certified replacement cats. The other states do not.
Federal law says that you cannot relocate the cat(s) from stock, and cannot change the number of cats. Not all states enforce Federal law.
captainofiron
12-19-2019, 01:43 PM
In my experience, OBD2 testing is a easy enough test to pass if the visual aspect is not to stringent. (if it is you failed regardless of what cats you put in) Is the car tuned for turning off all emissions ready lights?
I meant to post that there is a two speed idle test in my county as well, the place I have taken it in the past doesnt really do a visual, they just drive it into the bay and plug it in
so right now I am throwing an MIL for EGR flow, pretty sure it was due to my cut out leaking, BUT now that I put in a new exhaust and chunked my homebrew y-pipe, I am hoping its leak free and will no longer throw the MIL
Car Sound Exhaust owns Magnaflow. Appears the converters are now branded as MagnaFlow.
http://www.marcomuffler.com/magnaflow.html
https://www.magnaflow.com/products/94009-catalytic-converter-magnaflow-standard-grade-federal-epa-compliant-universal-catalytic-converter?aces=9577099
California and New York require CARB certified replacement cats. The other states do not.
Federal law says that you cannot relocate the cat(s) from stock, and cannot change the number of cats. Not all states enforce Federal law.
interesting, well that kind of sucks, after dealing with the Magnaflow tech people I have more than a bad taste in my mouth, I called again asking for specs on the 59929 and got the same legalease and telling me that would not give me any info unless I had an application
in my experience the inspectors dont really care if you have longtubes or moved the cats, as long as you are running cats and the exhaust doesnt smell like raw fuel
Injuneer
12-19-2019, 01:56 PM
To get the one I linked (3” universal w/ heat shield) I entered 1994- Chevrolet - Camaro - Z28 - 5.7L V8. That looks similar in size and design the the ones I had, but mine did not have the heat shield. I had the passenger side in the stock side dimple for the stock cat. Drivers side was hanging pretty low, but it never hit anything. But I have AS&M single-cat mid-lengths with modified collectors/extensions so they can be run as duals.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.