PDA

View Full Version : cloyes double row timing set on 96-97 lt1


93bird
10-08-2019, 11:14 AM
will it work with the reluctor wheel?
Catmaigne
10-09-2019, 06:48 AM
With the stock cover? No. There is a EFI billet cover it will work with though.
93bird
10-09-2019, 07:40 AM
You can't clearance it like the 92-95 covers. I have one on my 95 setup with a facktory cover that I clearance with a grinder
96LT1355Z28
10-09-2019, 08:46 AM
The billet dbl roller cleared my 96-97 cover but most say they won't. Not sure if I just got lucky or maybe there's a difference in thickenss between the billet and standard dbl roller.
93bird
10-09-2019, 09:05 AM
The cover I have now is a 95. I will have to dig thru my paper work to see the part# on the set I used. I wrnt to switch to the 96-97 cover so I can run the 411 pcm.
Catmaigne
10-09-2019, 12:47 PM
You could run the ZZ4 timing set and a reluctor behind the 96-97 cover. It has the same HD chain and crank sprocket as the LT4 Extreme Duty set for way cheaper. But to fit a double roller you're gonna need a billet cover to get everything inside. I went that route because I was determined to waste money at the time.