94 z28 camaro

[stevenrogers89]

Am new to this but am looking to rebuilt my z28 it has a real bad blow by so am looking to buy some some parts and could use some help with choosing the right parts for my build

[Sahara54]

Am new to this but am looking to rebuilt my z28 it has a real bad blow by so am looking to buy some some parts and could use some help with choosing the right parts for my build

Give us some more info. Goals, budget, what it has already?

[Injuneer]

You're going to have to open it up and inspect the rings, pistons, and cylinder walls to determine the specific cause of the blowby.

[stevenrogers89]

its t56 has complete comp cam kit and ported heads with headers 3'stainless exhaust but ill have around 2500 to 3000 budget wish just looking to try get around 350 to 400 hp but the motor was suppose to have been spotless inside no ring wear what so ever and on my way home i started having optispark problem and now after i got it back running now i have a bad blowbye

[Sahara54]

What injectors and if so was it tuned for them? Any info on who ported the heads and cam specs.


Sent from my iPhone using Tapatalk

[NoMoneyZ]

Never take anyone's word on what they say the engine has in it or condition. You need to determine cause of blowby before you make any choices.

[SSlowBoat]

I. can't. do. this. anymore. without. punctuation

Sent from my SM-N950U using Tapatalk

[AL 9C1]

Didn't these things have issues with valve stem seals blowing by pretty bad? Either way I would do some compression testing before I go to far diagnosing.

[SSlowBoat]

how do you know you even have blow by? I thought we fried a heads cam boosted stock bottom end because I was getting puff puff puff out of the breather......

The Pcv valve was stuck.....I tore a whole car apart that was then down half a year for a pcv valve...

Sent from my SM-N950U using Tapatalk

[stevenrogers89]

ok i drove the car the other day and found out that 3 of the roller rockers has jumped off and one of the push rods fell down in the head maybe thats what was causing the blow by and loss of power plus it is blowing oil out around the dip stick and front seal can that cause all them prob

[stevenrogers89]

but the car has stock injectors and hasnt had a tune yet

[SSlowBoat]

ok i drove the car the other day and found out that 3 of the roller rockers has jumped off and one of the push rods fell down in the head maybe thats what was causing the blow by and loss of power plus it is blowing oil out around the dip stick and front seal can that cause all them probif the rockers aren't opening valves and ur just dumping raw fuel into a cylinder, compressing it, and it's not going anywhere you have wiped/destroyed rings. this isn't a blow by issue, you have fried rings and bad bores now, you're getting compression into bottom end

Sent from my SM-N950U using Tapatalk

[stevenrogers89]

so wonder what caused them to jump off in the first place? so that prob wouldnt have nothing to do with the blow by

[stevenrogers89]

so whats the best road to take at this time when i pull it and rebuild it what would be some good ideas of a good build

[Sahara54]

so whats the best road to take at this time when i pull it and rebuild it what would be some good ideas of a good build

What are your goals?