Okay one more time PUSHRODS

[zooguy]

How do these pushrod lengths look?

https://uploads.tapatalk-cdn.com/20170212/f5677f293d18c909bae95b5df2dc49cd.jpg

https://uploads.tapatalk-cdn.com/20170212/940d5e733dc83d0d817362c3eea9cff7.jpg

Sent from my SM-N910T using Tapatalk

[SSlowBoat]

How do these pushrod lengths look?

https://uploads.tapatalk-cdn.com/20170212/f5677f293d18c909bae95b5df2dc49cd.jpg

https://uploads.tapatalk-cdn.com/20170212/940d5e733dc83d0d817362c3eea9cff7.jpg

Sent from my SM-N910T using Tapatalk
I'd run it. Make sure ur pushrods aren't riding inside edge of guide plate. They are supposed to ride sides only.

Sent from my SAMSUNG-SM-G935A using Tapatalk

[zooguy]

Here is cylinder number 2 and with the 7.100 pushrods that I had before.

https://uploads.tapatalk-cdn.com/20170213/7d0de63f36b85733e0a0bf9e01fd97ae.jpg

https://uploads.tapatalk-cdn.com/20170213/777b12efd70148733ab0e19cbcdffd56.jpg

Now to get my measurements I am using a lifter that I have taken appart and taken out the spring. Then putting in washers. So I have made it a solid lifter. That way the plunger can't fall/compress giving me a wrong length for the pushrod.

Sent from my SM-N910T using Tapatalk

[SSlowBoat]

Here is cylinder number 2 and with the 7.100 pushrods that I had before.

https://uploads.tapatalk-cdn.com/20170213/7d0de63f36b85733e0a0bf9e01fd97ae.jpg

https://uploads.tapatalk-cdn.com/20170213/777b12efd70148733ab0e19cbcdffd56.jpg

Now to get my measurements I am using a lifter that I have taken appart and taken out the spring. Then putting in washers. So I have made it a solid lifter. That way the plunger can't fall/compress giving me a wrong length for the pushrod.

Sent from my SM-N910T using Tapatalk
You could try a 7.050 if u want, but I'd run the first one, what length was the first pics? Good on doing the solid lifter. I'm lazy and have moroso checker light weight springs

Sent from my SAMSUNG-SM-G935A using Tapatalk

[zooguy]

You could try a 7.050 if u want, but I'd run the first one, what length was the first pics? Good on doing the solid lifter. I'm lazy and have moroso checker light weight springs

Sent from my SAMSUNG-SM-G935A using Tapatalk

7.100 on the first pics too ... ill try 7.050 ans see how it looks

[BALLSS]

The 7.100 look good. You can try a 7.050...but I think you are good with the 7.100.

You want the sweep "slightly" on the outside of center vs inside like the pc shows

[BALLSS]

The 7.100 look good. You can try a 7.050...but I think you are good with the 7.100.

You want the sweep "slightly" on the outside of center vs inside like the pc shows

[96LT1355Z28]

The first pic looks good the 7.100 I believe? There's pics on my site that show what it should look like HERE. (http://bdbracing.com/?page_id=375)