Trans problems

[beaver50]

I had my trans rebuilt.after getting it back together,i had too much stall for my engine.So I went to a2000 stall.Got it back togther.Im still having trouble with 1st.It goes in but not all the way seems like.It shifts perfect after 1st/Could I have a valve body problem?It shifts alot better with the smaller stall,just 1st.WHAT DO U THINK FRANK????????

[SSlowBoat]

I had my trans rebuilt.after getting it back together,i had too much stall for my engine.So I went to a2000 stall.Got it back togther.Im still having trouble with 1st.It goes in but not all the way seems like.It shifts perfect after 1st/Could I have a valve body problem?It shifts alot better with the smaller stall,just 1st.WHAT DO U THINK FRANK????????
Is the car tuned for the stall

Sent from my SAMSUNG-SM-G935A using Tapatalk

[harner]

Cahall

[CPT]

Was the aluminum forward piston upgraded to steel during the build? You definitely have a forward clutch issue going on. Who specced out the stall?

[beaver50]

No tune for the stall.

[CPT]

It won't require a retune if the stall is under 3200... Unless it's a cheap converter that is slipping too much.

[beaver50]

No body spected stall out for me Frank.I had a 1800 stall in it with the original engine.So I just thought that 2500 would be right.(its wasnt)It goes straight into second gear now as soon as it starts rolling.Straight to second.How can that happen????

[CPT]

Put a scanner on it and see if it's commanding the 1-2 shift that early. And check for codes. Why aren't you taking it back to the place that built it? A 2500 stall shouldn't have been too much... Even for a stock engine. You have other issues going on there.

[beaver50]

I took it back today frank.They said they would check it out.

Also dont nobody buy a monster stall!!!The reason,I called them to buy a 2500 stall.No problem they said.When I got the stall it was a CNC stall had the date stamped on it.on the stall CNC-3-16.So I called them about it.I was told,if dont have any in stock they send what they think is a quality stall.I told them I wonted a green monster stall.that is why I called them was fpr the monster stall.I was told to ship it back at my cost and for a extra $15 dollars they would ship me the green monster stall.RIP OFF

[SSlowBoat]

I took it back today frank.They said they would check it out.

Also dont nobody buy a monster stall!!!The reason,I called them to buy a 2500 stall.No problem they said.When I got the stall it was a CNC stall had the date stamped on it.on the stall CNC-3-16.So I called them about it.I was told,if dont have any in stock they send what they think is a quality stall.I told them I wonted a green monster stall.that is why I called them was fpr the monster stall.I was told to ship it back at my cost and for a extra $15 dollars they would ship me the green monster stall.RIP OFF
If you wouldve asked us we wouldve told you that monster is garbage dude. Protorque is 300 bux

Sent from my SAMSUNG-SM-G935A using Tapatalk

[popo8]

Their customer service has been proven to be "less than adequate."

LTXtech.com IS my drug...
OWNER/ADMIN

[beaver50]

I put a valve body in it.It shifts great now.Its finally ready.thanks for all the help my friends.