Lc-2 with HPtuners

[z28rob18]

Does anyone use the lc2 with hptuners? I can figure out how to set it up I have the numbers that the wideband offset spreadsheet give I entered the 7.35 and 22.whatever but it can't be correct cause the AFR in the scanner reads 22 and I know it's not cause the cars clearly running rich. Also hptuners reads that the TPS is 100% all the time I put a new sensor in it and it still reads 100%

[gmpowered]

lc2/lc1 is probably the most popular wideband used.

Are you using pro or standard?
The link below is for standard, helped me back in 07 and i still use it when i brain fart.
http://www.corvetteforum.com/forums/c5-scan-and-tune/1705471-connecting-wideband-via-egr-or-a-c-pressure-in-hp-tuners.html

You NEED to have the PID in the table display, check that for TPS.
Make sure you save changes.
You have to have the correct functions in the table display to log anything especially new things like AFR vs watever you are tuning, MAP aka speed density, MAf ect.

There are configs for lc1s on hptforum.
Check out russk, he has killer configs.

[z28rob18]

I have the pro so the wideband is wired to the interface