View Full Version : 80e Vent tube breather tank
shownomercy
09-08-2015, 08:26 AM
Thinking of running a 4an line from vent tube to puke tank on firewall, thoughts?
SSlowBoat
09-08-2015, 09:25 AM
Cahall
Sent from my SAMSUNG-SM-G900A using Tapatalk
Ryan Stout
09-08-2015, 10:07 AM
It's an 80e tho....
dawdaw
09-08-2015, 11:09 AM
Real men run glides and 400s!
firebird_1995
09-08-2015, 05:07 PM
Why is it belching trans fluid?
shownomercy
09-08-2015, 05:16 PM
Why is it belching trans fluid?
My guess is it was too full before TS, got hot as hell, puked itself low, then started to aerate and spew more out the vent.
I want to have some safety net from when it is hot and I am pushing it hard. Obviously I will get the level fixed but cleaning the underside of my car gets old.
firebird_1995
09-08-2015, 07:09 PM
Oh ok. I would be worried about having too much restriction on the vent line. Could blow out seals. Maybe you could plumb it in a way that would still allow it to vent should the catch can not receive excess oil fast enough.
popo8
09-09-2015, 08:43 AM
Oh ok. I would be worried about having too much restriction on the vent line. Could blow out seals. Maybe you could plumb it in a way that would still allow it to vent should the catch can not receive excess oil fast enough.
They have catch cans with breathers on them if thats what u mean.
LTXtech.com IS my drug...
shownomercy
09-09-2015, 08:56 AM
I believe he is implying the pressure head created by a few feet of hose on the breather may be detrimental
firebird_1995
09-09-2015, 05:21 PM
I believe he is implying the pressure head created by a few feet of hose on the breather may be detrimental
Maybe? I'm not sure at what rate it's puking. I guess a -8 hose would ensure it moves freely into the catch can without much resistance on the vent line.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.