94M6TA_AKA-BROOKE
07-08-2014, 07:13 PM
Alright have a few questions about my rear end,looking for some advice and help. So the issues I'm having with it are as follows, rear end shutters when starting from a stop unless the rpms and the clutch is let out just right, under any sort of a load more then accelerating lightly enough to get moving the best way I can describe is it gets a stalling out feeling like the cars missing or has water in the fuel if that makes any sense which it also does on any sort of a grade as well. Cannot drive it in 6th because it really gets bad as far as that issue goes. It also shutters downshifting,mostly from 4th-3rd and 3rd-2nd unless really low rpm like no more then 1500. The issues while driving are somewhat inconsistent at times and there really isn't any noise that I was ever able to tell. The chatter and shuttering is extremely bad and very consistent however in reverse. I never was able to get the rear end opened up for any visual exam so all I have is what I can best describe the symptoms as.
Anybody had any similar issues before that may be able to possibly pinpoint what the problem could likely be? Also I'm wanting to get the car back with me sometime in the next couple months, would like to hopefully do an "inexpensive" fix as best as possible so I can drive the car instead of have it shipped on a truck because its going to cost $2100 jus to have it shipped and around a $500 roundtrip ticket. I'm fairly confident that I could even with fixing it make the drive for less and then be able to get a road trip with her,which I'd prefer.
What can I get a good enough center section for,and what else would I need or should I do along with it? Also how much of a pain in the ass is it to do all this, never done a rear end before. And do you need any specialty tools to do it,the reason I ask is I may or may not be able to find somewhere decent to work on the car where someone may have a decent selection of tools.
Hope I didn't drag this out to far lol Any advice,opinions,tips and help is greatly appreciated fellas!
Anybody had any similar issues before that may be able to possibly pinpoint what the problem could likely be? Also I'm wanting to get the car back with me sometime in the next couple months, would like to hopefully do an "inexpensive" fix as best as possible so I can drive the car instead of have it shipped on a truck because its going to cost $2100 jus to have it shipped and around a $500 roundtrip ticket. I'm fairly confident that I could even with fixing it make the drive for less and then be able to get a road trip with her,which I'd prefer.
What can I get a good enough center section for,and what else would I need or should I do along with it? Also how much of a pain in the ass is it to do all this, never done a rear end before. And do you need any specialty tools to do it,the reason I ask is I may or may not be able to find somewhere decent to work on the car where someone may have a decent selection of tools.
Hope I didn't drag this out to far lol Any advice,opinions,tips and help is greatly appreciated fellas!