PDA

View Full Version : Clutch Pedal - Can It be Removed??


musict
11-20-2013, 06:59 AM
Swapping the T56 for a T400..... before I start untangling the mess under my dash can the clutch pedal be separated from the brake pedal, or is it one assembly??..... How big of a job is this??

Thanks for the input!!

Tim
fullforce
12-05-2013, 08:59 AM
I cant believe there are no replys to this! I cant give a good answer but I know the pedals are an entire assembly, im sure if you remove the whole assembly you can figure out a way to get the clutch pedal off.
Fastbird
12-05-2013, 09:05 AM
Easily? No. Not without removing the entire pedal assembly. Once you have that out though.....You should be able to get it off the bracket assembly.
Mystery Bird
12-05-2013, 12:00 PM
It would be less work to swap out the pedal assembly.
gunters96lt1
12-05-2013, 02:44 PM
You can, yes. I did, I had to drop my column down to get the assembly out. If I would of had a auto assembly I would of just swapped it.
casey20000007
12-05-2013, 10:56 PM
Or just cut it off with a saw saw


SMOKE TIRES NOT DRUGS
musict
12-09-2013, 06:55 AM
I cant believe there are no replys to this! I cant give a good answer but I know the pedals are an entire assembly, im sure if you remove the whole assembly you can figure out a way to get the clutch pedal off.

Thanks fullforce for bumping this back into the conversation..... it appears I either need a chain saw (knuckle head advice) or replace the entire assembly since it would have to come out anyway to remove the clutch pedal. It's just going to be a PITA because of my cage and all the wiring from a alarm system installed.