driveshaft length short th350 swap.

[1fstss]

i cannot find a solid answer... I need to know the length of the driveshaft for a short tail (6inch) th350 swap. i know its the same length as the 200C out of the 82 camaro but everywhere i look it gives me like 3 answers... i know it has to be 3 inches longer than a stock driveshaft... but i cant even find a solid answer on that... ive read 41.5 and then i read 44.25... any solid answer would be great!! and im aware i should measure for it but i dont have that luxury right now... i appreciate any help!

[dawdaw]

http://midwestchassis.com/how-to--help-downloads.html

Middle of page right hand side. This will get you where you need to be

[1fstss]

except i cant measure it... thanks for the link though! im actually surprised no one has a std. length this is a common swap!

[1fstss]

for anyone google searching this... I talked to Midwest Chassis... the Stock 4th gen driveshaft is 41.5 inches center of the Ujoint to center of the Ujoint, the total shaft you need is 44 3/4 center U joint to center U joint, and thats using a 1350 U joint to use a 6 inch tail shaft th350