Torque Arm Help!~!!!

[LtxFBodyFtW]

well i swapped my car over from Auto to 6 speed, and apparently the torque arm mounts are different? or am i trying to bolt it up all wrong, this is a FACTORY torque arm and i have both cars auto and 6 speed just need to know if they are fdifferent?

[BlackWidowSS]

The auto Tq Arm had more holes in it and is thinner than the M6 arm...HOWEVER, they both will bolt up...how are they not lining up right? The open side (or inside) should be facing the driveshaft. How do you have the rear end lifted up?

[firebird_1995]

The auto Tq Arm had more holes in it and is thinner than the M6 arm...HOWEVER, they both will bolt up...

I was wondering about that. I noticed my dads m6 ta seemed heavier and it looks like its actually got an plate welded on in the middle for strength that I never noticed on my other ones

[popo8]

Depending on the year... I found that there are different mounts that were used.

I left my stock 6spd TA mount at the garage... if I can find it and it was not thrown out... you can have it if you pay shipping.

[BlackWidowSS]

yeah, the M5 arms are stiffer and stronger, but the mounting holes should be exactly the same. I had an auto arm on my M6 for a short period of time and had no issue mounting it up...

[LtxFBodyFtW]

well i tried mounting mine i went from a auto in a 95 to the 6 speed out of my 93, the bolt thats made onto the mount was WAYY to long, and it just didnt come close at all to working, i really need this lol i got some fellas' whos been talking shit throughout my build so its time to SHUT EM UP!!!! :)n LTX FTW

[LtxFBodyFtW]

and the car was on a lift, the kind that has the swinging arms, would that throw this out of wack?