PDA

View Full Version : My day at the dyno.


Wooshie
09-30-2010, 05:43 PM
I took the camaro to the dyno today. It was a pretty good day. I have the sheet from the second best run and a few vids. It was a mustang dyno and the best pull was 339 whp and 331wtq. The guy at the shop said it would be about 360whp on a dyno jet. I am impressed with this for my mods and through a 12 bolt.


http://www.youtube.com/watch?v=YzgFThz9x2I


http://www.youtube.com/watch?v=eDpM-3BNG0Y


http://www.youtube.com/watch?v=_qKfXrEQLaM

5042
Joker Z28
09-30-2010, 05:47 PM
Nice get an MSD ignition and break 360wheel haha
F.G.
09-30-2010, 06:41 PM
nice
94ta383
09-30-2010, 06:52 PM
Nice job woosh
JPack
09-30-2010, 08:03 PM
How close was the tune? Wish we could have data logged it some to really dial it in
Wooshie
09-30-2010, 10:14 PM
The fuel was heavy over 5500. We backed it off twice and it was coming in about 12.6 after that. The first pull made 301 to the wheels. Just by adjusting fuel and timing we picked up 40 horse to the wheels. Other than that it was really good.
Z28pr0jekt
09-30-2010, 10:21 PM
I don't like that they're just starting the car and making a run. No time for the pcm to switch to closed loop or the car to get to operating temp
Chris
09-30-2010, 10:28 PM
The car is warmed up to view the wideband then they do the dyno. The car isnt in closed loop any ways at wot .
Z28pr0jekt
09-30-2010, 10:34 PM
The car is warmed up to view the wideband then they do the dyno. The car isnt in closed loop any ways at wot .
I understand this but the oil still needs to get up to temp we never shut my car off when dynoing and the only time I see a reason to is if it is overheating or if loading a new tune.

And even still every shop I've been to runs the car until it hits operating temp and then does the pull.
95formula383lt1
09-30-2010, 10:41 PM
mine made 311, 306, and 299 on stock tune with a cc306 on a tired motor with power droping off a cliff at 5200. i hope it makes numbers like urs now that its tuned an new bottom end.
Wooshie
09-30-2010, 10:48 PM
mine made 311, 306, and 299 on stock tune with a cc306 on a tired motor with power droping off a cliff at 5200. i hope it makes numbers like urs now that its tuned an new bottom end.

You should. I was told the heads are what is limiting me at this point. Sine I'm not really working I may have to wait awhile. I'm still happy this thing pulls like a rocket now.
JPack
10-01-2010, 07:54 AM
Glad it all worked out. Should be real fun to drive now. You will have to take me for a ride soon. :)
Wooshie
10-01-2010, 11:02 AM
Glad it all worked out. Should be real fun to drive now. You will have to take me for a ride soon. :)
Most definitely.
Ryle
10-06-2010, 12:01 PM
Not bad Woosh! should be a fun ride for ya.




BTW I am so Jealous of the 12-bolt... I know it's only a matter of time before my junk 10-bolt blows up