Post you Nitrous install pics, for a newbie to Nitrous.

[95zsean]

Like the title says "Please" post you pics so I can get an idea of how to install mine. I think I'm going to buy a Nitrous Outlet solenoid bracket, and fuel rail adaptor to go with everything else i have. What I'm looking for is ruting of wires, relays and the lines around the engine bay. Also where to install the Mallory 685 box.

Thanks
Sean

[95zsean]

38 people looked at this post and not a pic... Even a link would be good. PLEASE...LOL. I've ordered a solenoid bracket from nitrous outlet to make it look cleaner, and have decided to mount the 685 box under the pasengers seat. Put Pics of how you routed the wiring around the engine bay would be nice. I will post pics when I get mine done to help other people, but I could really use some help now.

Thanks
Sean

[n2ocamaro]

Here is mine. Pics are from last fall. I just got finished rerouting all the wiring. I moved my relays to under the dash and the throttle switch to behind the gas pedal. The few wires left in the engine bay are now ran with the fuel injector wiring so you can't see any nitrous wiring now. The fuel rail covers were hiding most of it before, I have taken those off now. If you do a search on here, LS1tech, and LT1engine.com, you will find a ton of pics.
3660
3661

Made my own solenoid brackets...
3662
3663

[95zsean]

Thanks for the pics.. Thats a sweet looking car and a clean install. I have searched all the other boards and only found the same pics over and over, or LS cars.
Where did you mount you ignition box?

[n2ocamaro]

It was mounted on the front side of the strut tower above the fuse box, but I just moved all 3 boxes (MSD 6A, Multi step retard and digital window switch) over to where my battery was. Battery is going to the back. Working on that now, along with alternator relocation and ABS delete.

[TorqueAddict]

your setup is really nice n20camaro, where did you get your bottle bracket at?

[faust]

heres the brakets i made to mount the solenoids on the stb next stop , polisherhttp://i75.photobucket.com/albums/i310/faustZ28/brackets.jpg

[n2ocamaro]

your setup is really nice n20camaro, where did you get your bottle bracket at?

I made it out of some sheet metal. The front bolts to the rear seat cushion mount and the rear is bolted to the sheet metal that makes the rear seat well. Here is another pic without the bottle in.

[hbgben]

Very slick set-up there N2O

[n2ocamaro]

Very slick set-up there N2O

Thanks!

[Formula383]

This is the old setup from last year. The new setup is going to be somewhat different... :D

Nitrous Outlet LT1 Plate Kit
http://farm4.static.flickr.com/3148/2716774837_1bf31c6f45_b.jpg

Solenoids (Nitrous - Purge - Fuel)
http://farm4.static.flickr.com/3086/2716774851_e6eaaaabdf_b.jpg

View from driver side
http://farm4.static.flickr.com/3212/2716774767_b39573875a_b.jpg

Another view from driver side. Shows hard-line from fuel rail to fuel solenoid.
http://farm4.static.flickr.com/3173/2716774887_17b27f606d_b.jpg

Nitrous Outlet Ashtray 4-Switch Panel
http://farm4.static.flickr.com/3192/2716774973_7dd5ce9ba6_b.jpg

Nitrous Outlet Ashtray 4-Switch Panel (Armed)
http://farm4.static.flickr.com/3254/2716774781_792ea2c0b5_b.jpg

Nitrous Outlet F-Body Center Console Switch Panel with Autometer Cobalt II N2O pressure gauge and line lock switches
http://farm4.static.flickr.com/3123/3882417764_d08987b2cf_b.jpg

Nitrous Outlet Single Stage Window Switch/WOT Switch
http://farm4.static.flickr.com/3132/2717588778_9bced4ce1b_b.jpg

Nitrous Outlet Single Stage Window Switch/WOT Switch (Armed)
http://farm4.static.flickr.com/3269/2717588804_cc1b45f6fd_b.jpg

MSD Digital 6 Plus, pulls timing when system is armed
http://farm4.static.flickr.com/3244/2717588760_c4f8ccff2d_b.jpg

Nitrous Outlet 10 lbs Bottle, 860 F-body Mount, 860 Heated Bottle Bracket
http://farm4.static.flickr.com/3030/2717588688_34d618e773_b.jpg

Bottle showing heater pressure switch, pressure gauge and weather pack connectors
http://farm4.static.flickr.com/3182/2716774635_641f4c4a61_b.jpg

Transparent view of bottle behind interior panel
http://farm4.static.flickr.com/3201/2717721632_5e60221cf5_b.jpg

Hidden bottle in spare tire area
http://farm4.static.flickr.com/3278/2717588650_54012a9217_b.jpg

Autometer Digital Pro Shift Light
http://farm4.static.flickr.com/3081/2716774591_a8950362cb_b.jpg

Autometer Digital Pro Shift Light, illuminated blue
http://farm4.static.flickr.com/3020/2716774821_ce9ef4f38e_b.jpg

Relays and fuse panel for nitrous solenoids, bottle heater and dedicated fuel cell located behind glove box.
http://farm4.static.flickr.com/3611/3291045574_f027bd3f8a_b.jpg

Nitrous Outlet F-Body Dedicated Fuel Cell
http://farm3.static.flickr.com/2734/4058445716_e0f6eab017_b.jpg

[ItSSlowZ28]

that is a sick set-up right there. super clean too. awesome work

[ksmyss]

Mine was completly hidden. People even knew I had it but had trouble finding it.

[95zsean]

This is the old setup from last year. The new setup is going to be somewhat different... :D

Nitrous Outlet LT1 Plate Kit
http://farm4.static.flickr.com/3148/2716774837_1bf31c6f45_b.jpg

Solenoids (Nitrous - Purge - Fuel)
http://farm4.static.flickr.com/3086/2716774851_e6eaaaabdf_b.jpg

View from driver side
http://farm4.static.flickr.com/3212/2716774767_b39573875a_b.jpg

Another view from driver side. Shows hard-line from fuel rail to fuel solenoid.
http://farm4.static.flickr.com/3173/2716774887_17b27f606d_b.jpg

Nitrous Outlet Ashtray 4-Switch Panel
http://farm4.static.flickr.com/3192/2716774973_7dd5ce9ba6_b.jpg

Nitrous Outlet Ashtray 4-Switch Panel (Armed)
http://farm4.static.flickr.com/3254/2716774781_792ea2c0b5_b.jpg

Nitrous Outlet F-Body Center Console Switch Panel with Autometer Cobalt II N2O pressure gauge and line lock switches
http://farm4.static.flickr.com/3123/3882417764_d08987b2cf_b.jpg

Nitrous Outlet Single Stage Window Switch/WOT Switch
http://farm4.static.flickr.com/3132/2717588778_9bced4ce1b_b.jpg

Nitrous Outlet Single Stage Window Switch/WOT Switch (Armed)
http://farm4.static.flickr.com/3269/2717588804_cc1b45f6fd_b.jpg

MSD Digital 6 Plus, pulls timing when system is armed
http://farm4.static.flickr.com/3244/2717588760_c4f8ccff2d_b.jpg

Nitrous Outlet 10 lbs Bottle, 860 F-body Mount, 860 Heated Bottle Bracket
http://farm4.static.flickr.com/3030/2717588688_34d618e773_b.jpg

Bottle showing heater pressure switch, pressure gauge and weather pack connectors
http://farm4.static.flickr.com/3182/2716774635_641f4c4a61_b.jpg

Transparent view of bottle behind interior panel
http://farm4.static.flickr.com/3201/2717721632_5e60221cf5_b.jpg

Hidden bottle in spare tire area
http://farm4.static.flickr.com/3278/2717588650_54012a9217_b.jpg

Autometer Digital Pro Shift Light
http://farm4.static.flickr.com/3081/2716774591_a8950362cb_b.jpg

Autometer Digital Pro Shift Light, illuminated blue
http://farm4.static.flickr.com/3020/2716774821_ce9ef4f38e_b.jpg

Relays and fuse panel for nitrous solenoids, bottle heater and dedicated fuel cell located behind glove box.
http://farm4.static.flickr.com/3611/3291045574_f027bd3f8a_b.jpg

Nitrous Outlet F-Body Dedicated Fuel Cell
http://farm3.static.flickr.com/2734/4058445716_e0f6eab017_b.jpg




Thats what I'm looking for!!!! Thats SWEET!!! I think your pics are where i got the idea for my 685 box going under the seat. I even have the switch plate from HSW, and a remote bottle opener.
Thanks

[Formula383]

Formula383, Thats a really nice setup!!! i think it's where I got the idea to put the 685 box under the seat.
Thanks

Thanks man! Hopefully that will give you some ideas. Let me know if you have any questions about anything.

Kyle

[95zsean]

I'm just waiting on a solenoid bracket and a fuel adaptor from Nitrous Outlet. Then I'm sure I'll have Questions.:peace2:

[bootsy crouton]

http://i924.photobucket.com/albums/ad86/lts1ow/DSC02729.jpg?t=1273159370

http://i924.photobucket.com/albums/ad86/lts1ow/DSC02699.jpg?t=1273159407

http://i924.photobucket.com/albums/ad86/lts1ow/DSC02644.jpg?t=1273159448

http://i248.photobucket.com/albums/gg190/sweetbmxrider/purge002.jpg?t=1268502747

Goes vroom. Sometimes.

[95zsean]

How did you get the nitrous line into the engine bay? Did you run it through the inside the car?

[bootsy crouton]

Line runs behind engine, under PCM, then through a hole in fender wall, under the mud guard or whatever it is and then down the SFC until it comes up in the cabin. Bottles on the tranny tunnel.

[95zsean]

I've got a spare tire mount, I think its 860 or something like that. I was wondering what to tie the line to, never thought of the SFC. I guess i need to get at installing it.... Just waiting for a couple of thing from Nitrous Outlet.
Thanks

[mrbadlt1]

Kyle your set-up is sexy end of story... show no how did you sneek on here? lol

[KissMyWhtSS]

This is the old setup from last year. The new setup is going to be somewhat different... :D

View from driver side
http://farm4.static.flickr.com/3212/2716774767_b39573875a_b.jpg

Nitrous Outlet Ashtray 4-Switch Panel
http://farm4.static.flickr.com/3192/2716774973_7dd5ce9ba6_b.jpg

Transparent view of bottle behind interior panel
http://farm4.static.flickr.com/3201/2717721632_5e60221cf5_b.jpg

Love it. :cool:

[Formula383]

How did you get the nitrous line into the engine bay? Did you run it through the inside the car?

I ran my line through the inside of the car along the passenger side and used the same grommet as the wiring harness to get to the engine bay. Just pull the PCM out and you will see the big grommet.

[Formula383]

Kyle your set-up is sexy end of story... show no how did you sneek on here? lol


Love it. :cool:

Thanks!

[joeZ96]

Kyle - Killer job. Where is your battery? Under the spare tire bottle mount I assume?

[SexyTransAm]

id post pics of mine but ya cant see anything lol

[dwritch]

Here is a hidden fogger I have w/ NX shark nozzles..... It's for sale too :devil:

http://i287.photobucket.com/albums/ll137/boostwhat/Forsale004.jpg

[95zsean]

Here is a hidden fogger I have w/ NX shark nozzles..... It's for sale too :devil:

http://i287.photobucket.com/albums/ll137/boostwhat/Forsale004.jpg




Ok, thats the best I've seen!!!!

[Formula383]

Kyle - Killer job. Where is your battery? Under the spare tire bottle mount I assume?

Thanks man. The battery was on the driver side cubby hole in the hatch. I've since relocated it to the middle of the well in a polished battery box.

[justanlt1]

Here is a hidden fogger I have w/ NX shark nozzles..... It's for sale too :devil:

http://i287.photobucket.com/albums/ll137/boostwhat/Forsale004.jpg

I plan on doing something like this next when the motor is out of my car :hail:

[SexyTransAm]

i just cant get over how damn cool that intake is!