sinistr
04-08-2010, 08:43 PM
all right long story short ... i had my 93 on a tow dolly and some construction debis popped up and smacked my linkage into gear ... soooooo now the tranny is shot . shot dosent describe it , i had a solid double handful of parts i pulled out of the deep pan ... i know basically the 700r4 and 4l60 (non electronic) are almost identiccal .. i can find 700r4 s locally and cheap .. so my question is what can i use off my 4l60 .. i have a trans go shift kit in my valve so i was curious if that would bolt in and the second gear servo thing that came with the kit . im almost posative fluid wasnt bein pushed through there cause all the tranny lines were cold when there was smoke coming out the dipstick tube ... and wanted to know if my verter is compatable with the input shaft .. i know i have to switch the tail housing and all and should still be able to use the stock crossmember .. im not a tranny person sooo any input would be greatly appreciated . i know theres better trannys to drop in but i just want to get her on the road for now and eventually have 1 built for me ...