10 bolt gears.

[dakota]

I have done a great deal for researching, and for now i'm planing on staying with the 10 bolt for a while, and i really REALLY want gears, i hear they do wonders.... but what gears ratio wise ? mostly stock car with 502 cam... what do you think? i really want it to rip outa the hole...... thanks guys!

[SGT_WRIGHT]

Auto car.......3.73
Manual Car...4.10 Keep in mind these are my personnal preferences

Also, when picking gears, make sure you check the dealer data sheet, which is basically a sticker on the inside of the glove box, and see what code you have. One carrier is for 2.73's, and the other is for gears larger. This makes a difference when ordering the gears. I had the GU2 code in mine, which meant I needed to order the 3.73 gears that fit the 2.73 carrrier.

The 2.73 to 3.73 gears change was a solid 0.3 sec reduction in my 1/4 mile time back when it was basically stock as a rock.

[BLK95-Z]

I have 4.10s in my 10 bolt and I love em. Im not sure what tranny you have but my gears work good with a 6 speed.

Im not sure how long itll last though lol

[popo8]

Well just so we start on the right foot, if you throw sticky tires on there...."ripping outta the hole" is gona grenade that rear sooner rather than later.....

With that being said, I dont have sticky tires on my 6spd and I love my 4.10s.....

[SGT_WRIGHT]

I've heard this too. I've been running my auto car on a slick tire for a few years on the bottle, and no issues yet, but I hear the manual cars have it off much worse.

[Wooshie]

I have an M6 with 4:10's and I destroyed 2 10 bolts in under a year. Gears make a world of difference, but if you are a stick car I would start saving for something better.

[chevymec]

You can also play with tire height.

[Itsonlyanlt1]

Has anyone ever tried 4.56's that are made for the 10 bolt? Im not worried about blowing the rearend, but 3.73's just arent near enough gear for the track.

[BlackWidowSS]

I have some Motive 3.90's for sale that are still New in Box with a Motive Rebuild kit!

[5POINT7]

Auto car.......3.73
Manual Car...4.10I agree, as for brand go with motive.

[Thumper]

how much you asking....


I have some Motive 3.90's for sale that are still New in Box with a Motive Rebuild kit!

[94Blackbird]

I had 4.56 gears for awhile. practically made 1st gear useless :D then i broke the axle so bad it was cheaper to find a replacement axle.
Definitly saving for something I can't break.

[BlackWidowSS]

how much you asking....

I would LIKE 250 for the Motive Gears AND a Motive Rebuild Kit. Everything is still new and still in the boxes they came in!

If that is too high, pm me and we can work something out.

[96BrknZ]

im going 4.10s whenever i get mine:) let me know how you like them when u DO get them

[Raffman]

Hey POPO, How are you!!!

I'm gonna be ordering 4.10 Motives, Thanks to you, Now, I'm a bit confused on what to order , there are 7.5, 8.5,10.5 so on, how or what did you do to order , help me out, please

i drive a 95 Z28 M6

Thank you

[~chipsahoy~]

I personally have 3.73's on my M6 car. But then again, I don't see a lot of track time.... :)

[harner]

Hey POPO, How are you!!!

I'm gonna be ordering 4.10 Motives, Thanks to you, Now, I'm a bit confused on what to order , there are 7.5, 8.5,10.5 so on, how or what did you do to order , help me out, please

i drive a 95 Z28 M6

Thank you

I believe you want the 7.5/7.625 set. If you are unsure, have the garage that will be installing them buy them and the install kit.

[z28camaro1996]

my car is a m6 and i had 3.73s but my 4.10s are way better.

[Itsonlyanlt1]

I had 4.56 gears for awhile. practically made 1st gear useless :D then i broke the axle so bad it was cheaper to find a replacement axle.
Definitly saving for something I can't break.

I have a TH350 with a 28" tire, and Im track only. Did you make any clean passes with those gears before it broke. Im looking to get a set of 4.56's because 3.73's arent cutting it.