- Navigation
Results 1 to 10 of 11
Thread: Tuners
-
02-28-2018, 08:53 AM #1
Tuners
I live in northwest Indiana and looking for a tuner for a cammed trans am any know where I can find one
Sent from my iPhone using Tapatalk
-
02-28-2018, 10:16 AM #2Lurker
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Johnny
- Vehicle
- 1994 formula A4
- Location
- Henderson, TN
- Posts
- 935
is your car still on the 97 OBD2 pcm?
-
02-28-2018, 10:16 AM #3
Yes
Sent from my iPhone using Tapatalk
-
02-28-2018, 10:31 AM #4Lurker
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Johnny
- Vehicle
- 1994 formula A4
- Location
- Henderson, TN
- Posts
- 935
My experience and most others will agree is to swap to a obd1 pcm. All you need Is a 94 or 95 pcm and a 94 or 95 knock sensor. Then get a aldl cable for a 95 since it will be the obd2 diagnostic port. Then you can download tuner pro rt free, and go to http://fbodytech.com and download the free software to load tunes, that's the one I use and it works wonderful there are others out there. Both of them accept donations if you like the product but they are otherwise free.
You can download a few cc503 tunes for free or get a email tune from someone, I used @MoeHorsePower
If you don't wanna do all that I'm sure you can mail your obd2 pcm to someone
Is your car and automatic?
-
02-28-2018, 01:25 PM #5
Yes automatic
Sent from my iPhone using Tapatalk
-
02-28-2018, 02:52 PM #6Lurker
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Johnny
- Vehicle
- 1994 formula A4
- Location
- Henderson, TN
- Posts
- 935
-
02-28-2018, 06:04 PM #7Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
03-01-2018, 07:56 AM #8Lurker
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Johnny
- Vehicle
- 1994 formula A4
- Location
- Henderson, TN
- Posts
- 935
-
03-01-2018, 08:00 AM #9Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Membernope more to it than that, it's in @Cahall trans thread. we were gonna do @Gassey car obd1 swap then talked to Frank and forgot all the other stuff.
Basically if you do it, it will downshift 3 neutral 2 and that will beat the trans up, plus the lock up will burn up too. if you want to see a 3 neutral 2 downshift look at my impala on my YouTube on the dyno.....it wasn't pretty
Sent from my SM-N950U using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
03-01-2018, 08:26 AM #10LTx Guru
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Fred
- Vehicle
- 1994 Formula - SOLD
- Location
- Central NJ
- Posts
- 2,283
Cahall 4L60E thread:
http://ltxtech.com/forums/showthread...d-interchangesSOLD - GONE TO A (VERY) GOOD HOME ! - 94 Formula A3+1: 381ci forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / CC solid roller / TH400+GearVendors OD / 4.11 Strange 12-bolt / 300-shot N2O / Spohn Suspension / roll bar / MoTeC M48 Pro engine management system /a few other odds 'n ends.
-
The Following User Says Thank You to Injuneer For This Post:
Bookmarks