Winter Motivation...OPEN HEADERS!

**zooguy** · 12-23-2013, 02:58 AM

what cam is that and what is the idle set at?

**Mystery Bird** · 12-23-2013, 06:34 AM

Cam came from LE, it's a 242/248 on a 110 LSA. Idle is set at 950.

**bowtiedad_z28** · 12-23-2013, 11:48 AM

That sounds sweet. I just knew you were going to say something at the end. I got a chuckle.

**dawdaw** · 12-24-2013, 08:33 PM

Originally Posted by Mystery Bird

Cam came from LE, it's a 242/248 on a 110 LSA. Idle is set at 950.

@Mystery Bird what's the rough valve lift on it if you don't mind and what's the spring pressure? Cam installed straight up?

***popo8*** · 12-24-2013, 09:18 PM

Sounds nasty...and yes...much better.

LTXtech.com is my drug.

**Mystery Bird** · 12-25-2013, 06:17 AM

Originally Posted by dawdaw

@Mystery Bird what's the rough valve lift on it if you don't mind and what's the spring pressure? Cam installed straight up?

Lift is 58x on both and seat is in the low 150's, open pressure around 410. Cam is installed straight up. One of my plans for next spring is to get it on the dyno to see torque curve and decide if I want to change it then.

**Flyinz** · 12-25-2013, 09:51 AM

Yep, that helped! Im gonna fire mine up today, build some heat up in it and poss take a spin around the block in it. Then prepare to do some work on it. Now I just have to get a new Propane tank for my garage heater...

**dawdaw** · 12-25-2013, 09:52 AM

Originally Posted by Mystery Bird

Lift is 58x on both and seat is in the low 150's, open pressure around 410. Cam is installed straight up. One of my plans for next spring is to get it on the dyno to see torque curve and decide if I want to change it then.

It sounds good and works good to move that heavy car and transmission combo of yours, I was entertaining thoughts of ripping mine out this winter and maybe call Lloyd up and see what his opinions are.. Hope you can make it to the shootout next year!!!!!