- Navigation
Results 1 to 10 of 28
Thread: Coil brackets
-
11-04-2016, 11:28 PM #1
Coil brackets
Does anyone have a set of coil brackets to mount ls style coils on the centerbolt valve covers ? Anywhere besides Efi connection make them ?
Sent from my iPhone using Tapatalk
-
11-05-2016, 04:45 PM #2The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
I've got these. Bought them for a 24x setup and went another direction. One set is for the heat sink coils and the other is not. I think the aluminum ones are for non heat sinkChris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
11-05-2016, 05:37 PM #3
BP automotive makes a nice economical set. And he is a sponsor on here also.
-
11-05-2016, 08:42 PM #4
I have a set of coils with the heat sink already. The black setup looks like the factory bracket from the ls motor which won't clear the oil cap or breather on lt1. Which coil is the aluminum set for and what are you asking for them ?
Sent from my iPhone using Tapatalk
-
11-05-2016, 08:43 PM #5
-
11-05-2016, 09:05 PM #6The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
The 2 on the right are factory ls brackets. The single one pictured is a modified factory bracket that was on an lt1. I've got the other one somewhere. I'll have to see what the aluminum ones fit. I was thinking they were the opposite of the modified set. I'll get back to you
Sent from my SM-G900V using TapatalkChris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
11-05-2016, 09:20 PM #7The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
The aluminum brackets are for the heat sink coils and attach to the fuel rails. $50 shipped
Sent from my SM-G900V using TapatalkChris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
11-05-2016, 11:31 PM #8
-
11-05-2016, 11:37 PM #9The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
Same hardware that holds the injector rails down. I don't think there will be anything there to bolt to on a single plane though. Most of the rails for single plane intakes bolt through the side of the rail. This would be more for factory intakes. I could probably make you a set that would work if you didn't want to bolt to the valve cover.
Sent from my SM-G900V using TapatalkChris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
11-06-2016, 01:30 AM #10Xtreme Member
- Status
- Offline
- Join Date
- Mar 2015
- Name
- Dan Dalessandro
- Vehicle
- 1997 Camaro Z28
- Posts
- 2,211
If he doesn't take it, I'll take it @firebird_1995
14.307@98.21, 2.155 60'
97 Z28, M6 with stuff done to it. SHOOTING FOR 12s IN A BOLT ON LT1 BOYS
Bookmarks