- Navigation
Results 1 to 4 of 4
Thread: not LTX but I have a question
-
04-10-2016, 10:19 AM #1
Founding Member
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Jay
- Vehicle
- 93 Ultra Z
- Location
- Delaware
- Posts
- 3,144
not LTX but I have a question
@Cahall
I have a 85 vette 700R4 for the 87 trans am project. I know the tail shaft housing is different and i still have the f body one for the tq arm. how do I mount to a cross member? do i just use the vette one and relocate the tq arm to the cross member and make the vette tail shaft fit the cross member?
thanks!
-
04-10-2016, 10:24 AM #2
LTXTech Sponsor
- Status
- Offline
- Join Date
- Jan 2013
- Name
- Gail C. Cahall
- Vehicle
- 93 Camaro, 95 Impala SS, 01 Corvette, '05 Dodge Ram
- Location
- Newark, Delaware
- Posts
- 619
You can't use a Corvette 700R4 in an F-Body. The case has no place to bolt a traditional mount and the output shaft is 1" shorter on the Vette unit.
FrankGail C. Cahall
CAHALL PERFORMANCE TRANSMISSIONS
-
04-10-2016, 12:53 PM #3
Founding Member
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Jay
- Vehicle
- 93 Ultra Z
- Location
- Delaware
- Posts
- 3,144
Hmmmm. That sucks. Now I guess I will have a challenge when I get to that point. Lol. Or a core for you. :-)
Sent from my SM-G900V using Tapatalk
-
The Following User Says Thank You to jaysz2893 For This Post:
-
04-10-2016, 03:42 PM #4
VIP Member
- Status
- Offline
- Join Date
- Jan 2009
- Name
- Paul Edwards
- Vehicle
- 1993 Camaro Z28
- Location
- Port Charlotte FL
- Posts
- 2,666
I used a vette 4l60e in a lt1 bird I had no issues. It was out of a 96 vette. I just swapped the tail housing. I guess the 700r4 is different.
Sent from my SM-G925V using Tapatalk
1995 Formula 383/t56 gone
1993 Camaro Z28, forged, TFS heads, solid roller, prosystems carbed, t56 swapped spec 3+
"Nitrous is like Tara Reid with an STD. You want to hit it, but your afraid of the consequences"
Reply With Quote
Bookmarks