Become a ltxtech.com member, Click here to register!
SSS

Results 1 to 9 of 9
  1. #1
    VIP Member


    Status
    Offline
    Join Date
    Dec 2011
    Name
    Mark
    Vehicle
    1993 Camaro Z28, 2005 Chevy Silverado 3500 Crew cab dually, 2005 GMC Yukon Denali
    Location
    Altoona, PA
    Posts
    809

    Default Rare Ultra Z-hood with air box for Sale

    Selling a rare Ultra Z hood

    These are No longer available.

    93-97 were only made by SLP. Aftermarket never made them for the LT1 cars. Only LS cars are available.

    Air box included with new K&N filter (May need different rubber coupler as this wasn't hooked up to a factory LT1 TB. See pics)

    Paint is 8 out of ten. Has a couple paint chips and a couple light cracks in paint. ( cracks are in paint, not hood) see picture. Hard to see them with the reflection in the paint.

    Someone opened up the scoop more on the inside. I'm assuming for more airflow. Tried to get a pic but its hard to see. Just needs cleaned up a little.

    Asking $900





    Sent from my iPad using Tapatalk
    Last edited by 1QUICKZ28; 12-05-2016 at 09:38 PM.
    Stock bottom end, Impala head gaskets, Stock heads w/stage 2 port polish Comp beehive springs, Crane 1.6 RR's, Thunder Racing cam, Cloyes Billet True Roller TC, Long tubes, custom true dual 3" w/X-pipe, Ported intake with 58mm TB, 36lb injectors, PCMforless chip, Tick Performance stage 3 M6, Strange S60 4:10's True Trac 35 spline axles, MSD complete Ignition system, Summit electric water pump and a ton of other upgrades.

  2. #2
    VIP Member


    Status
    Offline
    Join Date
    Dec 2011
    Name
    Mark
    Vehicle
    1993 Camaro Z28, 2005 Chevy Silverado 3500 Crew cab dually, 2005 GMC Yukon Denali
    Location
    Altoona, PA
    Posts
    809

    Default

    Dropped the price for the LTXTech members


    Sent from my iPad using Tapatalk
    Stock bottom end, Impala head gaskets, Stock heads w/stage 2 port polish Comp beehive springs, Crane 1.6 RR's, Thunder Racing cam, Cloyes Billet True Roller TC, Long tubes, custom true dual 3" w/X-pipe, Ported intake with 58mm TB, 36lb injectors, PCMforless chip, Tick Performance stage 3 M6, Strange S60 4:10's True Trac 35 spline axles, MSD complete Ignition system, Summit electric water pump and a ton of other upgrades.

  3. The Following User Says Thank You to 1QUICKZ28 For This Post:


  4. #3
    Lurker


    Status
    Offline
    Join Date
    Jul 2013
    Name
    Brian Crelin
    Vehicle
    1993 Camaro Z28
    Location
    Hampton, NJ
    Posts
    3

    Default

    Where in PA are you located? Im in hampton NJ and would love to have it!
    93Z, LS1 lid setup, full exhaust, PCMofNC mail order tune, KW coilovers, subrame connectors, rear LCAs and relocation brackets, MGW shifter, best ET 13.71@103.5 with a shitty launch.

  5. #4
    Lurker


    Status
    Offline
    Join Date
    Jan 2014
    Name
    Daniel
    Vehicle
    1996 Camaro Z28
    Location
    Bay Area California
    Posts
    485

    Default

    You're welcome Brian


    Sent from my iPhone using Tapatalk
    Arctic White 1996 Z28. Stock internal LT1, CAI, LM1, MGW Shifter, 3.73's, some suspension junk, and shiny salad shooters (retired). Forgestar F14's 18x10 on all 4. Fun stuff coming soon. Also, Cali smog regulations suck...period. **Insert witty quote here** LT1FTW that is all. Have a nice day.

  6. #5
    VIP Member


    Status
    Offline
    Join Date
    Dec 2011
    Name
    Mark
    Vehicle
    1993 Camaro Z28, 2005 Chevy Silverado 3500 Crew cab dually, 2005 GMC Yukon Denali
    Location
    Altoona, PA
    Posts
    809

    Default

    @BrianZ28 I'm in Altoona, PA. Almost dead center of the state. I have a guy coming Saturday to look at. He put a deposit on it to hold until then. He drives truck and is out of town until Saturday. I'm a man of my word so he has first dibs. If he doesn't want for some reason you would be next in line if interested.


    Sent from my iPhone using Tapatalk
    Stock bottom end, Impala head gaskets, Stock heads w/stage 2 port polish Comp beehive springs, Crane 1.6 RR's, Thunder Racing cam, Cloyes Billet True Roller TC, Long tubes, custom true dual 3" w/X-pipe, Ported intake with 58mm TB, 36lb injectors, PCMforless chip, Tick Performance stage 3 M6, Strange S60 4:10's True Trac 35 spline axles, MSD complete Ignition system, Summit electric water pump and a ton of other upgrades.

  7. The Following User Says Thank You to 1QUICKZ28 For This Post:


  8. #6
    Lurker


    Status
    Offline
    Join Date
    Jul 2013
    Name
    Brian Crelin
    Vehicle
    1993 Camaro Z28
    Location
    Hampton, NJ
    Posts
    3

    Default

    Not a problem, I respect that. Ill be available if the deal with that guy does not work out. Thank you
    93Z, LS1 lid setup, full exhaust, PCMofNC mail order tune, KW coilovers, subrame connectors, rear LCAs and relocation brackets, MGW shifter, best ET 13.71@103.5 with a shitty launch.

  9. #7
    VIP Member


    Status
    Offline
    Join Date
    Dec 2011
    Name
    Mark
    Vehicle
    1993 Camaro Z28, 2005 Chevy Silverado 3500 Crew cab dually, 2005 GMC Yukon Denali
    Location
    Altoona, PA
    Posts
    809

    Default

    Quote Originally Posted by BrianZ28 View Post
    Not a problem, I respect that. Ill be available if the deal with that guy does not work out. Thank you
    Ok. I will let you know. Thanks!


    Sent from my iPhone using Tapatalk
    Stock bottom end, Impala head gaskets, Stock heads w/stage 2 port polish Comp beehive springs, Crane 1.6 RR's, Thunder Racing cam, Cloyes Billet True Roller TC, Long tubes, custom true dual 3" w/X-pipe, Ported intake with 58mm TB, 36lb injectors, PCMforless chip, Tick Performance stage 3 M6, Strange S60 4:10's True Trac 35 spline axles, MSD complete Ignition system, Summit electric water pump and a ton of other upgrades.

  10. #8
    VIP Member


    Status
    Offline
    Join Date
    Dec 2011
    Name
    Mark
    Vehicle
    1993 Camaro Z28, 2005 Chevy Silverado 3500 Crew cab dually, 2005 GMC Yukon Denali
    Location
    Altoona, PA
    Posts
    809

    Default

    @BrianZ28 Sorry to say but the hood is sold. Thanks for your interest.
    @popo8 Thread can be locked.


    Sent from my iPhone using Tapatalk
    Stock bottom end, Impala head gaskets, Stock heads w/stage 2 port polish Comp beehive springs, Crane 1.6 RR's, Thunder Racing cam, Cloyes Billet True Roller TC, Long tubes, custom true dual 3" w/X-pipe, Ported intake with 58mm TB, 36lb injectors, PCMforless chip, Tick Performance stage 3 M6, Strange S60 4:10's True Trac 35 spline axles, MSD complete Ignition system, Summit electric water pump and a ton of other upgrades.

  11. #9
    "The Rock"


    Status
    Offline
    Join Date
    Jul 2009
    Name
    Popo
    Vehicle
    1996 Impala with the heart of the old camaro. 1993 Corvette..
    Location
    Shillington, Pennsylvania, United States
    Posts
    61,345

    Default

    Congrats on the sale...

    Thread closed.

    LTXtech.com IS my drug...
    OWNER/ADMIN


    Our BIG MOMENT @ the 2012 LTXshootout

    http://www.facebook.com/photo.php?v=521756391174175

    1996 Camaro Z28: RIP 09/25/2016

    1994 Trans Am GT: SOLD 05/2017

    1985/1996GS clone: SOLD

    1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...

    2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..





  12. The Following User Says Thank You to popo8 For This Post:


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •