Become a ltxtech.com member, Click here to register!
CPT

Page 1 of 6 12345 ... LastLast
Results 1 to 10 of 57
  1. #1
    LTXTech Sponsor


    Status
    Offline
    Join Date
    Feb 2009
    Name
    David
    Vehicle
    1985 Camaro Z28/1994 Firebird Formula
    Location
    MO
    Posts
    918

    Default 2015 LTx Modified N/A Rules

    Modified N/A

    Qualifying, Ladder, and Tree Information

    Limited to quickest 16 qualifiers. Sportsman Ladder. .400 Pro Tree

    Vehicle/Body Rules

    Open to all year, make, and model vehicles. All vehicles must be stock bodied and stock appearing.
    Minimum race weight including driver 3100lbs.

    Engine & Drivetrain Rules

    Must have LT1 based engine (Factory LT1 Block). Cylinder heads must retain the factory 23 degree valve angle, Trick Flow 21 degree heads permitted (TFS-30400008-M54). Aftermarket heads and converted small block Chevrolet heads will be permitted if they follow the above guidelines.
    Aftermarket EFI PCM and Carburetors are allowed with a 200lbs weight penalty. LS1/24x PCM conversions allowed with 100lbs weight penalty. Gasoline or E85 Only. Rear mounted batteries must be mounted and vented per NHRA specifications and have a functional disconnect switch.
    Any GM transmission allowed. Torque converters not permitted with manual transmissions and clutch activated automatic transmissions are prohibited. Line locks, trans-brakes and two-steps allowed. Throttle stops, delay boxes, and auto shifters prohibited.
    Any automotive rear axle permitted.
    Nitrous bottles must be removed and feed line capped.

    Wheels & Tires

    Any automotive wheel permitted. Tires must have a maximum height of 30” and a maximum tread width of 10” for bias-ply and radial tires.

    Class Safety Requirements

    Vehicle and driver must meet NHRA certifications for time and speed the vehicle is running.
    Last edited by DMBlack; 12-16-2014 at 04:00 PM.
    -David-
    1985 Camaro Z28 (Under Construction)
    1994 Firebird Formula - LT1/4L60e (The Daily)

  2. The Following 4 Users Say Thank You to DMBlack For This Post:


  3. #2
    10 Second N/A Club


    Status
    Offline
    Join Date
    Sep 2008
    Name
    Josh
    Vehicle
    96 Z28
    Location
    Holden, MO (KC)
    Posts
    2,867

    Default

    Looking forward to this class and I'm willing to bet I'm the only M6 car in it! Now that there's plenty of time to make plans who's gonna come run? @joelster, @quik95lt1, @Badhawk, @AChotrod, @Nocturnal Z, @Tyler Wheat, @gump
    -Josh
    co-owner of BDBRacing.com
    NMCA OC 9004
    96, N/A 385, Holley EFI, Faceplated M6, AI TFS heads, LE SR cam, MWC Fab 9
    10.16 @ 136 1.50 60'........still workin on that 60' shootin for 1.4's!

  4. #3
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    My dad may join you this year in his camaro josh. Just depends on what we do to it this winter. Right now he's teetering on the edge of es and mod
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  5. #4
    10 Second N/A Club


    Status
    Offline
    Join Date
    Sep 2008
    Name
    Josh
    Vehicle
    96 Z28
    Location
    Holden, MO (KC)
    Posts
    2,867

    Default

    Good deal!
    -Josh
    co-owner of BDBRacing.com
    NMCA OC 9004
    96, N/A 385, Holley EFI, Faceplated M6, AI TFS heads, LE SR cam, MWC Fab 9
    10.16 @ 136 1.50 60'........still workin on that 60' shootin for 1.4's!

  6. #5
    VIP Member


    Status
    Offline
    Join Date
    Apr 2011
    Name
    KYLE
    Vehicle
    95 MQBM Z28
    Location
    davison michigan
    Posts
    3,874

    Default

    Well depending on what my car weighs I'm leaning on running this class as a 2nd class to my power adder class. .. When can we register so I can pay ?

  7. #6
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    Quote Originally Posted by dawdaw View Post
    Well depending on what my car weighs I'm leaning on running this class as a 2nd class to my power adder class. .. When can we register so I can pay ?
    Awesome! Should be a great class this year. We will be working on getting preregistration in place soon.
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  8. #7
    10 Second N/A Club


    Status
    Offline
    Join Date
    Sep 2008
    Name
    Josh
    Vehicle
    96 Z28
    Location
    Holden, MO (KC)
    Posts
    2,867

    Default

    Kyle, not sure your car will meet the rules with your NO2 stuff for the PA class. Look at the last line under "Engine & Drivetrain Rules"
    -Josh
    co-owner of BDBRacing.com
    NMCA OC 9004
    96, N/A 385, Holley EFI, Faceplated M6, AI TFS heads, LE SR cam, MWC Fab 9
    10.16 @ 136 1.50 60'........still workin on that 60' shootin for 1.4's!

  9. #8
    LTXTech Sponsor


    Status
    Offline
    Join Date
    Feb 2009
    Name
    David
    Vehicle
    1985 Camaro Z28/1994 Firebird Formula
    Location
    MO
    Posts
    918

    Default

    I think that is one thing we need to look at wording on. Having the bottle out and feed line off/capped should be sufficient if you want to run the n/a class. I will discuss it with the others. @firebird_1995 @79LT1Monte


    Sent from my iPhone using Tapatalk
    -David-
    1985 Camaro Z28 (Under Construction)
    1994 Firebird Formula - LT1/4L60e (The Daily)

  10. The Following User Says Thank You to DMBlack For This Post:


  11. #9
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    Yea I wouldn't bind anyone up on being able to run both classes. For those wanting to run both I see no reason not to allow n20 cars to run in the na class as long as the bottle is removed and an inspection done.
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  12. The Following User Says Thank You to firebird_1995 For This Post:


  13. #10
    VIP Member


    Status
    Offline
    Join Date
    Apr 2011
    Name
    KYLE
    Vehicle
    95 MQBM Z28
    Location
    davison michigan
    Posts
    3,874

    Default

    Ya that's no problem . If rules state you can't run the class because there's nitrous stuff on the car I won't. .. I just want to run a couple classes but 1 power adder class will be ok ...I was just going to disconnect the bottle was all

Page 1 of 6 12345 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •