- Navigation
Results 1 to 10 of 46
Thread: LTX clean out
-
07-25-2016, 12:35 PM #1"The Hammer"
- Status
- Offline
- Join Date
- Nov 2009
- Name
- JimmyMo
- Vehicle
- 1994 Trans Am
- Location
- In your kitchen, stealing your snacks...
- Posts
- 2,531
LTX clean out
At the present time I don't have the means or desire to finish out the boosted 383 I was building for my trans am. Rather than letting the parts sit and collect dust like they have been for the last 3 years, I want to put them up for sale and send them on to a new home. I will get pictures of everything either as I get to it or as people request it. All prices do not include shipping. The engine block is pick up or I can deliver within 300 miles for a small fee.
Summit racing double roller timing chain part number sum g66019. $30
NOTE: This timing chain will NOT work with a stock water pump. You have to go electric water pump to use this timing chain.
Factory 4 bolt LT1 block bored .030 over. Very minimal if any rust. Has been stored in a back and oiled periodically. Has ARP main stud kit installed. New freeze plugs, all oil galley plugs replaced, new cam bearings. Camshaft retainer plate not pictured. $500
Set of unmolested LT1 aluminum cylinder heads. Comes with rocker arms. $200 for the pair
Probe pistons SRS forged 383 pistons 1.125 compression height, 4.030 bore .927 wrist pin -12.8 cc dish (if I remember correctly would have been right around 10:1 compression with stock cylinder heads) includes wrist pins and spring steel pin locks. Full floating wrist pin $250
K1 Technologies 6 inch I beam connecting rods $150
Unmolested LT1 2 bolt main block. $75 local pick up or I can deliver within 300 miles for a fee
Stock Lt1 crankshaft $25
Like new Gen 2 optispark $150
F body accessory bracket w/ power steering pump and tensioner $150
Rocker Stud Girdle kit $80
I will be adding more parts as I go through what I have collected
Feel free to make requests. there may be some oddball stuff I have that I don't need.
Everything is located in North East Ohio, about a half hour east of Cleveland.Last edited by 94Blackbird; 11-19-2016 at 09:55 PM.
"Only in the Corps can you put three guys in a room with an anvil and a rubber mallet, come back 15 min later, and the anvil is broken, the rubber mallet is missing, and nobody saw a damned thing!"
-
07-25-2016, 01:01 PM #2Lurker
- Status
- Offline
- Join Date
- Sep 2014
- Name
- Joel
- Vehicle
- 1996 camaro Police interceptor
- Location
- Colorado
- Posts
- 1,157
I would be interested in the whole rotating assembly and the Billet oil pump drive. I also would be interested in boosted set up. You can contact my by
Sent from my SM-N915V using TapatalkLast edited by Camaro96; 08-05-2016 at 01:29 PM.
-
07-25-2016, 07:41 PM #3"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
-
07-25-2016, 09:07 PM #4"The Hammer"
- Status
- Offline
- Join Date
- Nov 2009
- Name
- JimmyMo
- Vehicle
- 1994 Trans Am
- Location
- In your kitchen, stealing your snacks...
- Posts
- 2,531
@popo8 Pics of the valve covers as requested. I can't find the hardware I had for it but I'll keep looking.
"Only in the Corps can you put three guys in a room with an anvil and a rubber mallet, come back 15 min later, and the anvil is broken, the rubber mallet is missing, and nobody saw a damned thing!"
-
07-25-2016, 11:14 PM #5"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
-
07-27-2016, 03:56 PM #6"The Hammer"
- Status
- Offline
- Join Date
- Nov 2009
- Name
- JimmyMo
- Vehicle
- 1994 Trans Am
- Location
- In your kitchen, stealing your snacks...
- Posts
- 2,531
@popo8 pm'd you
New parts added!Last edited by 94Blackbird; 07-27-2016 at 04:03 PM.
"Only in the Corps can you put three guys in a room with an anvil and a rubber mallet, come back 15 min later, and the anvil is broken, the rubber mallet is missing, and nobody saw a damned thing!"
-
The Following User Says Thank You to 94Blackbird For This Post:
-
07-29-2016, 04:30 PM #7"The Hammer"
- Status
- Offline
- Join Date
- Nov 2009
- Name
- JimmyMo
- Vehicle
- 1994 Trans Am
- Location
- In your kitchen, stealing your snacks...
- Posts
- 2,531
Crank, rods, damper and oil pump drive are SOLD!!!
"Only in the Corps can you put three guys in a room with an anvil and a rubber mallet, come back 15 min later, and the anvil is broken, the rubber mallet is missing, and nobody saw a damned thing!"
-
07-30-2016, 09:42 PM #8Xtreme Member
- Status
- Offline
- Join Date
- Apr 2012
- Name
- Cameron
- Vehicle
- 1994 Formula
- Location
- Dover, De
- Posts
- 2,076
I'll go second in line after Popo on the VC's.
2012 Sierra - 5.3, Summit "Stage 1" Truck Cam
1994 Jimmy - LS? LT? 4wd? AWD? Time? Money?
1994 Formula - 5.3, Terminator X, Billet VS7875, "Best Cam", T56, QP 9"
Formula Build Thread
-
07-31-2016, 12:45 AM #9"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
-
-
08-04-2016, 12:36 PM #10"The Hammer"
- Status
- Offline
- Join Date
- Nov 2009
- Name
- JimmyMo
- Vehicle
- 1994 Trans Am
- Location
- In your kitchen, stealing your snacks...
- Posts
- 2,531
Parts added!
"Only in the Corps can you put three guys in a room with an anvil and a rubber mallet, come back 15 min later, and the anvil is broken, the rubber mallet is missing, and nobody saw a damned thing!"
Bookmarks