Become a ltxtech.com member, Click here to register!
BP-Automotive

Results 1 to 3 of 3
  1. #1
    InActive Member


    Status
    Offline
    Join Date
    Jan 2009
    Location
    NC, MT
    Posts
    1,026

    Default 96 to 97+ tail light swap

    is there any thing special that has to be done or can you just switch them?

  2. #2
    InActive Member


    Status
    Offline
    Join Date
    Jan 2009
    Location
    NC, MT
    Posts
    1,026

    Default

    never mind, i found the thread about it

  3. #3
    LTX Master


    Status
    Offline
    Join Date
    Sep 2008
    Vehicle
    1994 Chevy Camaro z28
    Location
    IL
    Posts
    914

    Default

    To bring up an old thread..

    I did this swap, 97-02 tail lights with tail light harness. I found a link to an old cz28 message board, where someone posted, on how to cut a wire off the brake light switch, splice in a new wire and run it back to the light blue wire, in the new tail light harness.

    I did this, and now, when I KOEO, the brake lights are stuck on (minus 3rd brake light) but when you hit the brake pedal, the brake lights go out, and the 3rd brake light comes on like its supposed to. I splice the wrong light blue wire, obviously, lol. Does anybody have any advice? Perhaps advise me which, other light blue wire on that switch, that I need to splice in to?? The wire that I DID splice in to, is the most outside light blue wire on the brake light switch, closest to the yellow and green wires. HELP PLEASE!
    94' Z -383 LTx, AI TFS 215cc heads/C/I
    S60 rear
    Stepped Hedman Hustlers an a Monoblade TB

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •