- Navigation
Results 1 to 10 of 10
-
03-31-2009, 09:46 PM #1
Powder coated LS1 front,LT1 rear brakes-Baer,Hawk,Russel...
The pads and rotors alone cost almost $900., and those parts only have 600 miles...zero issues. I'm 99% certain that the calipers also have the Speed Bleeders already installed.
FRONT
02 LS1 Front Calipers/Spindles from an 02 TA w/ 1,200 miles - powder coated, calipers completely rebuilt w/ all new parts when coated a few years ago (<15K miles ago), FORMULA decals by Brent (will peel right off), Russel brake braided stainless hose on each caliper (~600 miles)
Baer DecelaRotors LS1 front rotors & Hawk Ceramic pads - very little wear, ~600 miles, followed directions from Baer about seasoning new rotors/pads, Rotors-$336 Pads-$100 shipped new.
REAR
Baer DecelaRotors & Hawk Ceramic pads - from a 93, very little wear, ~600 miles, followed Baer directions about seaoning new rotors/pads, Rotors-$355 Pads-$82 shipped new.
PRICE REDUCED
$500 picked up
$600 delivered
Add 3.5% if using Paypal.Last edited by Whitey; 05-30-2009 at 08:34 PM.
-
04-02-2009, 09:01 AM #2
-
04-04-2009, 03:18 PM #3
-
05-04-2009, 04:33 PM #4
-
05-05-2009, 11:29 AM #5
nice brakes man. bump good luck with the sale!
1994 T\A, BBK shorties,CAI, cutout, full exhaust,MSD wires, 160* t-stat, 3.73s, cc503-1.6rr's-lunati lifters-stock pushrods FTW
-
05-05-2009, 11:31 AM #6VIP Member
- Status
- Offline
- Join Date
- Apr 2009
- Vehicle
- 1991 C1500
- Location
- Bowling Green, Ky
- Posts
- 2,203
- Blog Entries
- 1
How much for front and rear shipped, total?
1991 Silverado 1500 - Beater/Project
1996 Camaro Z28 - Parted Out
1994 Camaro Z28 - Parted Out1981 Corvette - Driveway ornament
-
05-05-2009, 02:57 PM #7
-
05-17-2009, 08:36 AM #8
-
05-30-2009, 08:34 PM #9
-
06-14-2009, 11:28 AM #10
Bookmarks