- Navigation
Results 1 to 3 of 3
-
10-07-2021, 09:15 AM #1
Tuning for new gears speedo question
1983 jag xj6 with 94 lt1 and 4l60e current gears are 2.88, I have purchased everything to swap to 3.73 and will be doing that over the Christmas holidays,
I would however like to get a jump on my tune and have it ready to upload when gears are done, I know that my shirt point all need to be adjusted by .77211796 to be correct, but my question is with the speedo scalars tuner pro has 3 different scalars, a regular speedo scalar with a divisor of 22 a scan tool scalar with a divisor of 36.89, a fraction scalar with a divisor of 1.02 And there’s also a time between pulses for stop of 38.42 ms I have been comparing tune files and these numbers are all over the place on every different tune, even with same gears, My tune is from Moe and the numbers he has here must be pretty accurate as it’s almost bang on using a gps! , where would I find , or how would I calculate the new numbers needed for these scalars???
Any greatly appreciated.
Darren
-
10-11-2021, 03:34 PM #2Xtreme Member
- Status
- Offline
- Join Date
- Apr 2012
- Name
- Mike
- Vehicle
- 96 Z28, 95 Roadmaster
- Location
- Conshohocken, PA
- Posts
- 1,862
A little late, but use this Excel file to derive them. Use a GPS app on your phone to fine tune it further.
LT1 OBD1 Speedo Calibration for $EE (1).xls96Z M6, ERE-383 #60, AFR 210s, LE cam, 9", Procharger D1, ???whp
95 Roadmaster T-56 swap, LE1s, baby cam, 4.56s, "The Cammaster"
95 Firehawk hooptie, bolt-ons and suspension
-
-
10-12-2021, 07:19 AM #3
Perfect , thank you!!!
Bookmarks