Become a ltxtech.com member, Click here to register!
SSS

Results 1 to 3 of 3
  1. #1
    VIP Member


    Status
    Offline
    Join Date
    Dec 2011
    Name
    Mark
    Vehicle
    1993 Camaro Z28, 2005 Chevy Silverado 3500 Crew cab dually, 2005 GMC Yukon Denali
    Location
    Altoona, PA
    Posts
    809

    Default Ram Clutches Push Style conversion kit

    Has anyone tried one of these yet? Converts from a pull style clutch to a push style with a hydraulic bearing. This popped up as an advertisement on my FB page. Went to their website to check it out. 3 different versions available depending on clutch disc.

    https://ramclutches.com/lt1-camaro-converison-systems


    Sent from my iPhone using Tapatalk
    Last edited by 1QUICKZ28; 03-20-2020 at 06:54 PM.
    Stock bottom end, Impala head gaskets, Stock heads w/stage 2 port polish Comp beehive springs, Crane 1.6 RR's, Thunder Racing cam, Cloyes Billet True Roller TC, Long tubes, custom true dual 3" w/X-pipe, Ported intake with 58mm TB, 36lb injectors, PCMforless chip, Tick Performance stage 3 M6, Strange S60 4:10's True Trac 35 spline axles, MSD complete Ignition system, Summit electric water pump and a ton of other upgrades.

  2. #2
    Xtreme Member


    Status
    Offline
    Join Date
    Nov 2012
    Name
    Shaun
    Vehicle
    1994 Formula
    Location
    Phillipsburg NJ
    Posts
    7,249
    Supporting Member

    Default

    Quote Originally Posted by 1QUICKZ28 View Post
    Has any tried one of these yet? Converts from a pull style clutch to a push style with a hydraulic bearing. This popped up as an advertisement on my FB page. Went to their website to check it out. 3 different versions available depending on clutch disc.

    https://ramclutches.com/lt1-camaro-converison-systems


    Sent from my iPhone using Tapatalk
    There was other conversions out there, but its about time. converts it to ls style, which is a little more reliable than the pull style. I think @blackbirdws6 runs a much more expensive ls hydro conversion.
    2021 Charger Scat 392
    1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot

    The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
    10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!

  3. #3
    VIP Member


    Status
    Offline
    Join Date
    Dec 2011
    Name
    Mark
    Vehicle
    1993 Camaro Z28, 2005 Chevy Silverado 3500 Crew cab dually, 2005 GMC Yukon Denali
    Location
    Altoona, PA
    Posts
    809

    Default

    Quote Originally Posted by SSlowBoat View Post
    There was other conversions out there, but its about time. converts it to ls style, which is a little more reliable than the pull style. I think @blackbirdws6 runs a much more expensive ls hydro conversion.
    It’s great to see some new developments for the LT1/LT4 crowd. I’m curious as to what kind of power they will handle.


    Sent from my iPhone using Tapatalk
    Stock bottom end, Impala head gaskets, Stock heads w/stage 2 port polish Comp beehive springs, Crane 1.6 RR's, Thunder Racing cam, Cloyes Billet True Roller TC, Long tubes, custom true dual 3" w/X-pipe, Ported intake with 58mm TB, 36lb injectors, PCMforless chip, Tick Performance stage 3 M6, Strange S60 4:10's True Trac 35 spline axles, MSD complete Ignition system, Summit electric water pump and a ton of other upgrades.

  4. The Following User Says Thank You to 1QUICKZ28 For This Post:


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •